Re: Modem Hangup

Jared Groves ( (no email) )
Mon, 26 May 1997 23:39:42 -0400

Cool...I am just about set thanks to the help of several of you....and
thank you :) 1 more question...for example...if I shut a modem off and
turn it back on...it will not have the s0=1 switch set...it will not
autoanswer....even when I reset the port. Anyone know how to fix this?

----------
> From: Don Swett <dswett@ilnk.com>
> To: ntisp@emerald.iea.com
> Subject: Re: Modem Hangup
> Date: Monday, May 26, 1997 11:26 PM
>
> Do you have a portmaster book? I'm not sure off the top of my head but I
> think the command is
>
> add modem shortname longname speed string
>
> Sample: add modem boca bocarack 155200
at&f&c1&d2s0=1m0&k3&q5%c2%e2&w\r^OK
>
> Use you modem book to come up with a proper string for the modem you are
> using.
>
> Then you must configure each port to that modem. syntax as follows:
>
> set s0 modem shortname
>
> Example: set s21 modem boca
>
> Then you must reset the port. Do this to all ports. If your string is
> right, you should be in business shortly.
>
>
> Don Swett
> dswett@ilnk.com
> Interlink America
> http://www.ilnk.com
> Techsupport@ilnk.com
> Postmaster@ilnk.com
> webmaster@ilnk.com
>
>
>
> ----------
> > From: Jared Groves <jgroves@de-inc.com>
> > To: ntisp@emerald.iea.com
> > Subject: Re: Modem Hangup
> > Date: Monday, May 26, 1997 11:00 PM
> >
> > My modem DOESN'T say configured...as a matter of fact, it says NOT
> > configured ;)
> >
> > *shuffle shuffle* Checking...
> >
> >
> >
> > ----------
> > > From: Don Swett <dswett@ilnk.com>
> > > To: ntisp@emerald.iea.com
> > > Subject: Re: Modem Hangup
> > > Date: Monday, May 26, 1997 7:17 PM
> > >
> > > Telnet into the portmaster. at the prompt type "attach s0". then
type
> > > "ati1i2i3i4i5i6i7".
> > >
> > > This string should give you all the info your looking for.
> > >
> > > Depending on your brand of modem, you may get errors on some returns.
> > >
> > > If you do, just drop of the i? for the ones that you get errors on.
> > >
> > > ati3 thru ati5 will probably give you what your looking for but try
> them
> > > all either collectively or individually. Hope you got a book with
> those
> > > modems.
> > >
> > > Make sure you set the modem type in the portmaster.
> > >
> > > if you type "show s0" the modem should say "configured".
> > >
> > > Don Swett
> > > dswett@ilnk.com
> > > Interlink America
> > > http://www.ilnk.com
> > > Techsupport@ilnk.com
> > > Postmaster@ilnk.com
> > > webmaster@ilnk.com
> > >
> > >
> > >
> > > ----------
> > > > From: Jared Groves <jgroves@de-inc.com>
> > > > To: ntisp@emerald.iea.com
> > > > Subject: Re: Modem Hangup
> > > > Date: Monday, May 26, 1997 6:51 PM
> > > >
> > > > How can I check the NVRAM from the Port Master? Do I have to
> > disconnect
> > > > the modem etc and hook it up to a terminal, or can I do it from the
> > > > Terminal Server? Thanks :)
> > > >
> > > >
> > > >
> > > > ----------
> > > > > From: Kent Runyan <admin@konnections.com>
> > > > > To: ntisp@emerald.iea.com
> > > > > Subject: Re: Modem Hangup
> > > > > Date: Monday, May 26, 1997 4:17 PM
> > > > >
> > > > > What modems are you using? If they are USR Sportsters, you need
to
> > > make
> > > > > sure they have been initialized properly. Check the NVRAM in the
> two
> > > > that
> > > > > answer and compare the settings to the rest of them.
> > > > >
> > > > >
> > > > >
> > > > > Kent Runyan, Operations Manager
> > > > > Konnections, Inc.
> > > > > 2650 Washington Blvd. Ste 208
> > > > > Ogden, UT 84401
> > > > > 801-621-8511
> > > > > http://www.konnections.com
> > > > >
> > > > > ----------
> > > > > > From: Jared Groves <jgroves@de-inc.com>
> > > > > > To: ntisp@emerald.iea.com
> > > > > > Subject: Modem Hangup
> > > > > > Date: Monday, May 26, 1997 11:15 AM
> > > > > >
> > > > > > I am really stuck!!!! I just converted my whole system from a
> lame
> > > > > > multiport cyclades board over to a livingston pm2e....I had run
> > some
> > > > > trials
> > > > > > before I switched all of my lines over....however...now that
I've
> > > done
> > > > > the
> > > > > > switch...only 2 modems will answer. Number 1 and Number
3....all
> > of
> > > > the
> > > > > > rest will pick up and hangup immeaditly...without sending any
> kind
> > of
> > > > > > handshake....ANY help at all toward this would be
appreciated...I
> > am
> > > in
> > > > a
> > > > > > bind and none of my users can get online!
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
>
----------------------------------------------------------------------------

>
> >
> > >
> > > >
> > > > >
> > > > > > ----------------------
> > > > > > Jared Groves
> > > jgroves@de-inc.com
> > > > > > System Administrator
> > > > > > Digital Entropy
> > > > > http://www.de-inc.com
> > > > > >
> > > > > >
> > > > > > ----------------------------------------------------------
> > > > > > NTISP Mailing List listserver@emerald.iea.com
> > > > > >
> > > > >
> > > > > ----------------------------------------------------------
> > > > > NTISP Mailing List listserver@emerald.iea.com
> > > >
> > > > ----------------------------------------------------------
> > > > NTISP Mailing List listserver@emerald.iea.com
> > >
> > > ----------------------------------------------------------
> > > NTISP Mailing List listserver@emerald.iea.com
> >
> > ----------------------------------------------------------
> > NTISP Mailing List listserver@emerald.iea.com
>
> ----------------------------------------------------------
> NTISP Mailing List listserver@emerald.iea.com