add modem shortname longname speed string
Sample: add modem boca bocarack 155200 at&f&c1&d2s0=1m0&k3&q5%c2%e2&w\r^OK
Use you modem book to come up with a proper string for the modem you are
using.
Then you must configure each port to that modem. syntax as follows:
set s0 modem shortname
Example: set s21 modem boca
Then you must reset the port. Do this to all ports. If your string is
right, you should be in business shortly.
Don Swett
dswett@ilnk.com
Interlink America
http://www.ilnk.com
Techsupport@ilnk.com
Postmaster@ilnk.com
webmaster@ilnk.com
----------
> From: Jared Groves <jgroves@de-inc.com>
> To: ntisp@emerald.iea.com
> Subject: Re: Modem Hangup
> Date: Monday, May 26, 1997 11:00 PM
>
> My modem DOESN'T say configured...as a matter of fact, it says NOT
> configured ;)
>
> *shuffle shuffle* Checking...
>
>
>
> ----------
> > From: Don Swett <dswett@ilnk.com>
> > To: ntisp@emerald.iea.com
> > Subject: Re: Modem Hangup
> > Date: Monday, May 26, 1997 7:17 PM
> >
> > Telnet into the portmaster. at the prompt type "attach s0". then type
> > "ati1i2i3i4i5i6i7".
> >
> > This string should give you all the info your looking for.
> >
> > Depending on your brand of modem, you may get errors on some returns.
> >
> > If you do, just drop of the i? for the ones that you get errors on.
> >
> > ati3 thru ati5 will probably give you what your looking for but try
them
> > all either collectively or individually. Hope you got a book with
those
> > modems.
> >
> > Make sure you set the modem type in the portmaster.
> >
> > if you type "show s0" the modem should say "configured".
> >
> > Don Swett
> > dswett@ilnk.com
> > Interlink America
> > http://www.ilnk.com
> > Techsupport@ilnk.com
> > Postmaster@ilnk.com
> > webmaster@ilnk.com
> >
> >
> >
> > ----------
> > > From: Jared Groves <jgroves@de-inc.com>
> > > To: ntisp@emerald.iea.com
> > > Subject: Re: Modem Hangup
> > > Date: Monday, May 26, 1997 6:51 PM
> > >
> > > How can I check the NVRAM from the Port Master? Do I have to
> disconnect
> > > the modem etc and hook it up to a terminal, or can I do it from the
> > > Terminal Server? Thanks :)
> > >
> > >
> > >
> > > ----------
> > > > From: Kent Runyan <admin@konnections.com>
> > > > To: ntisp@emerald.iea.com
> > > > Subject: Re: Modem Hangup
> > > > Date: Monday, May 26, 1997 4:17 PM
> > > >
> > > > What modems are you using? If they are USR Sportsters, you need to
> > make
> > > > sure they have been initialized properly. Check the NVRAM in the
two
> > > that
> > > > answer and compare the settings to the rest of them.
> > > >
> > > >
> > > >
> > > > Kent Runyan, Operations Manager
> > > > Konnections, Inc.
> > > > 2650 Washington Blvd. Ste 208
> > > > Ogden, UT 84401
> > > > 801-621-8511
> > > > http://www.konnections.com
> > > >
> > > > ----------
> > > > > From: Jared Groves <jgroves@de-inc.com>
> > > > > To: ntisp@emerald.iea.com
> > > > > Subject: Modem Hangup
> > > > > Date: Monday, May 26, 1997 11:15 AM
> > > > >
> > > > > I am really stuck!!!! I just converted my whole system from a
lame
> > > > > multiport cyclades board over to a livingston pm2e....I had run
> some
> > > > trials
> > > > > before I switched all of my lines over....however...now that I've
> > done
> > > > the
> > > > > switch...only 2 modems will answer. Number 1 and Number 3....all
> of
> > > the
> > > > > rest will pick up and hangup immeaditly...without sending any
kind
> of
> > > > > handshake....ANY help at all toward this would be appreciated...I
> am
> > in
> > > a
> > > > > bind and none of my users can get online!
> > > > >
> > > > >
> > > > >
> > > > >
> > > >
> > >
> >
>
----------------------------------------------------------------------------
>
> >
> > >
> > > >
> > > > > ----------------------
> > > > > Jared Groves
> > jgroves@de-inc.com
> > > > > System Administrator
> > > > > Digital Entropy
> > > > http://www.de-inc.com
> > > > >
> > > > >
> > > > > ----------------------------------------------------------
> > > > > NTISP Mailing List listserver@emerald.iea.com
> > > > >
> > > >
> > > > ----------------------------------------------------------
> > > > NTISP Mailing List listserver@emerald.iea.com
> > >
> > > ----------------------------------------------------------
> > > NTISP Mailing List listserver@emerald.iea.com
> >
> > ----------------------------------------------------------
> > NTISP Mailing List listserver@emerald.iea.com
>
> ----------------------------------------------------------
> NTISP Mailing List listserver@emerald.iea.com