Brad
----------
> From: Jared Groves <jgroves@de-inc.com>
> To: ntisp@emerald.iea.com
> Subject: Re: Modem Hangup
> Date: Monday, May 26, 1997 8:39 PM
>
> Cool...I am just about set thanks to the help of several of you....and
> thank you :) 1 more question...for example...if I shut a modem off and
> turn it back on...it will not have the s0=1 switch set...it will not
> autoanswer....even when I reset the port. Anyone know how to fix this?
>
> ----------
> > From: Don Swett <dswett@ilnk.com>
> > To: ntisp@emerald.iea.com
> > Subject: Re: Modem Hangup
> > Date: Monday, May 26, 1997 11:26 PM
> >
> > Do you have a portmaster book? I'm not sure off the top of my head but
I
> > think the command is
> >
> > add modem shortname longname speed string
> >
> > Sample: add modem boca bocarack 155200
> at&f&c1&d2s0=1m0&k3&q5%c2%e2&w\r^OK
> >
> > Use you modem book to come up with a proper string for the modem you
are
> > using.
> >
> > Then you must configure each port to that modem. syntax as follows:
> >
> > set s0 modem shortname
> >
> > Example: set s21 modem boca
> >
> > Then you must reset the port. Do this to all ports. If your string is
> > right, you should be in business shortly.
> >
> >
> > Don Swett
> > dswett@ilnk.com
> > Interlink America
> > http://www.ilnk.com
> > Techsupport@ilnk.com
> > Postmaster@ilnk.com
> > webmaster@ilnk.com
> >
> >
> >
> > ----------
> > > From: Jared Groves <jgroves@de-inc.com>
> > > To: ntisp@emerald.iea.com
> > > Subject: Re: Modem Hangup
> > > Date: Monday, May 26, 1997 11:00 PM
> > >
> > > My modem DOESN'T say configured...as a matter of fact, it says NOT
> > > configured ;)
> > >
> > > *shuffle shuffle* Checking...
> > >
> > >
> > >
> > > ----------
> > > > From: Don Swett <dswett@ilnk.com>
> > > > To: ntisp@emerald.iea.com
> > > > Subject: Re: Modem Hangup
> > > > Date: Monday, May 26, 1997 7:17 PM
> > > >
> > > > Telnet into the portmaster. at the prompt type "attach s0". then
> type
> > > > "ati1i2i3i4i5i6i7".
> > > >
> > > > This string should give you all the info your looking for.
> > > >
> > > > Depending on your brand of modem, you may get errors on some
returns.
> > > >
> > > > If you do, just drop of the i? for the ones that you get errors on.
> > > >
> > > > ati3 thru ati5 will probably give you what your looking for but try
> > them
> > > > all either collectively or individually. Hope you got a book with
> > those
> > > > modems.
> > > >
> > > > Make sure you set the modem type in the portmaster.
> > > >
> > > > if you type "show s0" the modem should say "configured".
> > > >
> > > > Don Swett
> > > > dswett@ilnk.com
> > > > Interlink America
> > > > http://www.ilnk.com
> > > > Techsupport@ilnk.com
> > > > Postmaster@ilnk.com
> > > > webmaster@ilnk.com
> > > >
> > > >
> > > >
> > > > ----------
> > > > > From: Jared Groves <jgroves@de-inc.com>
> > > > > To: ntisp@emerald.iea.com
> > > > > Subject: Re: Modem Hangup
> > > > > Date: Monday, May 26, 1997 6:51 PM
> > > > >
> > > > > How can I check the NVRAM from the Port Master? Do I have to
> > > disconnect
> > > > > the modem etc and hook it up to a terminal, or can I do it from
the
> > > > > Terminal Server? Thanks :)
> > > > >
> > > > >
> > > > >
> > > > > ----------
> > > > > > From: Kent Runyan <admin@konnections.com>
> > > > > > To: ntisp@emerald.iea.com
> > > > > > Subject: Re: Modem Hangup
> > > > > > Date: Monday, May 26, 1997 4:17 PM
> > > > > >
> > > > > > What modems are you using? If they are USR Sportsters, you
need
> to
> > > > make
> > > > > > sure they have been initialized properly. Check the NVRAM in
the
> > two
> > > > > that
> > > > > > answer and compare the settings to the rest of them.
> > > > > >
> > > > > >
> > > > > >
> > > > > > Kent Runyan, Operations Manager
> > > > > > Konnections, Inc.
> > > > > > 2650 Washington Blvd. Ste 208
> > > > > > Ogden, UT 84401
> > > > > > 801-621-8511
> > > > > > http://www.konnections.com
> > > > > >
> > > > > > ----------
> > > > > > > From: Jared Groves <jgroves@de-inc.com>
> > > > > > > To: ntisp@emerald.iea.com
> > > > > > > Subject: Modem Hangup
> > > > > > > Date: Monday, May 26, 1997 11:15 AM
> > > > > > >
> > > > > > > I am really stuck!!!! I just converted my whole system from
a
> > lame
> > > > > > > multiport cyclades board over to a livingston pm2e....I had
run
> > > some
> > > > > > trials
> > > > > > > before I switched all of my lines over....however...now that
> I've
> > > > done
> > > > > > the
> > > > > > > switch...only 2 modems will answer. Number 1 and Number
> 3....all
> > > of
> > > > > the
> > > > > > > rest will pick up and hangup immeaditly...without sending any
> > kind
> > > of
> > > > > > > handshake....ANY help at all toward this would be
> appreciated...I
> > > am
> > > > in
> > > > > a
> > > > > > > bind and none of my users can get online!
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
>
----------------------------------------------------------------------------
>
> >
> > >
> > > >
> > > > >
> > > > > >
> > > > > > > ----------------------
> > > > > > > Jared Groves
> > > > jgroves@de-inc.com
> > > > > > > System Administrator
> > > > > > > Digital Entropy
> > > > > > http://www.de-inc.com
> > > > > > >
> > > > > > >
> > > > > > > ----------------------------------------------------------
> > > > > > > NTISP Mailing List listserver@emerald.iea.com
> > > > > > >
> > > > > >
> > > > > > ----------------------------------------------------------
> > > > > > NTISP Mailing List listserver@emerald.iea.com
> > > > >
> > > > > ----------------------------------------------------------
> > > > > NTISP Mailing List listserver@emerald.iea.com
> > > >
> > > > ----------------------------------------------------------
> > > > NTISP Mailing List listserver@emerald.iea.com
> > >
> > > ----------------------------------------------------------
> > > NTISP Mailing List listserver@emerald.iea.com
> >
> > ----------------------------------------------------------
> > NTISP Mailing List listserver@emerald.iea.com
>
> ----------------------------------------------------------
> NTISP Mailing List listserver@emerald.iea.com