An added note, I switched the other NAS from ftp logs to Radius accounting and it
also starts gives other errors missing attributes but I know what that happens, see
below ! Again on closing the dialup it gives an Acct batch error will try executing
current batch 1 more times. and then freezes accounting not authenticating the same
way the other NAS did BUT it did not give a Doctor Watson. Seems the Ascend 3048 can
give Radius a Doctor Watson error but the Gandalf does not. Both result in
accounting records not working.
Now for the added problem. I'm using MSacess and brought this problem up a month or
so ago, some help was suggested but the issue still is you cannot have duplicate
RadAttributeID in the RadAttributes table. MSAccess just gives index errors when
attempting to set it or anyone else as a primary key. I even tried to create the
table from scratch. Is there an updated sample database that has the RadAttribute
table setup proper or can someone email me the table. As it sits I can't have
duplicate RadAttributes so I can only use one NAS vendor.
--Mike KovacichPeter Deacon wrote:
> On Wed, 29 Mar 2000, Mike Kovacich wrote:>> > Thanks for the comeback Josh, I'm using RadiusNT 3, NT4, sp6a. I did have> > accounting going fine during the trial period (license was PRO version) but> > since I purchase the Standard Edition Key, I have not been able to get> > accounting to work proper. Authentication is fine on 2 different brands of> > NAS's. Only other software loaded on the NT since is WebTrends, and I've shut> > that down with same results.> > --> > Mike Kovacich>> What's the exact version ex. 3.0.168? You can find it via properties on> radius.exe in windows explorer or radius -v.>> Run 'radius -x15 -X' and send me the output where it crashes and I'll take> a peek. -X dumps the packet information.>> Have Fun!> Peter>>> > Josh Hillman wrote:> >> > > I'm coming into this late, so sorry if this has been mentioned, but what> > > version of RadiusNT are you using?> > >> > > Josh> > >> > > ----- Original Message -----> > > From: Mike Kovacich <sysadmin@inter-pc.com>> > > To: <radiusnt@iea-software.com>> > > Sent: Wednesday, March 29, 2000 11:25 AM> > > Subject: Re: [RadiusNT] Ascend Max3000 and Radius Accounting> > >> > > > RadiusNT 3 authenticates but gives error when sending stop records. I will> > > > clarify the symptoms:> > > > when a new debug window is open, It now sends the start record and does> > > put the> > > > call in the calls table, but when the connection closes and sends a stop> > > > account record this is the Dr. Watson application error:> > > > The instruction at "0x77f6754b" referenced memory at "0x00000013". The> > > memory> > > > could not be "read".> > > >> > > > The debug window must be closed and opened again otherwise no accounting> > > is> > > > done (start or stop)> > > >> > > > This is the debub window, the last line is it, then it displays the Dr.> > > Watson> > > > error.> > > > radrecv: Request from host cc32ef64 (MAXWarp) code=4, id=247, length=223> > > > User-Name = "atest"> > > > NAS-Identifier = 204.50.239.100> > > > NAS-Port = 20117> > > > NAS-Port-Type = 0> > > > Class = "IEAS1\0038062\00211"> > > > Acct-Status-Type = 2> > > > Acct-Delay-Time = 0> > > > Acct-Session-Id = "323011308"> > > > Acct-Authentic = 1> > > > Acct-Session-Time = 287> > > > Acct-Input-Octets = 3376> > > > Acct-Output-Octets = 1780> > > > Acct-Input-Packets = 38> > > > Acct-Output-Packets = 14> > > > Ascend-Terminate-Cause = 45> > > > Ascend-Connect-Progress = 60> > > >> > > > Any assistance will be appreciated.> > > >> > > > --> > > > Mike Kovacich> >> >> >> >> > For more information about this list (including removal) go to:> > http://www.iea-software.com/support/maillists/liststart> >>> For more information about this list (including removal) go to:> http://www.iea-software.com/support/maillists/liststart
For more information about this list (including removal) go to:http://www.iea-software.com/support/maillists/liststart