Peter Deacon wrote:
> On Wed, 29 Mar 2000, Mike Kovacich wrote:
>
> > Thanks for the comeback Josh, I'm using RadiusNT 3, NT4, sp6a. I did have
> > accounting going fine during the trial period (license was PRO version) but
> > since I purchase the Standard Edition Key, I have not been able to get
> > accounting to work proper. Authentication is fine on 2 different brands of
> > NAS's. Only other software loaded on the NT since is WebTrends, and I've shut
> > that down with same results.
> > --
> > Mike Kovacich
>
> What's the exact version ex. 3.0.168? You can find it via properties on
> radius.exe in windows explorer or radius -v.
>
> Run 'radius -x15 -X' and send me the output where it crashes and I'll take
> a peek. -X dumps the packet information.
>
> Have Fun!
> Peter
>
>
> > Josh Hillman wrote:
> >
> > > I'm coming into this late, so sorry if this has been mentioned, but what
> > > version of RadiusNT are you using?
> > >
> > > Josh
> > >
> > > ----- Original Message -----
> > > From: Mike Kovacich <sysadmin@inter-pc.com>
> > > To: <radiusnt@iea-software.com>
> > > Sent: Wednesday, March 29, 2000 11:25 AM
> > > Subject: Re: [RadiusNT] Ascend Max3000 and Radius Accounting
> > >
> > > > RadiusNT 3 authenticates but gives error when sending stop records. I will
> > > > clarify the symptoms:
> > > > when a new debug window is open, It now sends the start record and does
> > > put the
> > > > call in the calls table, but when the connection closes and sends a stop
> > > > account record this is the Dr. Watson application error:
> > > > The instruction at "0x77f6754b" referenced memory at "0x00000013". The
> > > memory
> > > > could not be "read".
> > > >
> > > > The debug window must be closed and opened again otherwise no accounting
> > > is
> > > > done (start or stop)
> > > >
> > > > This is the debub window, the last line is it, then it displays the Dr.
> > > Watson
> > > > error.
> > > > radrecv: Request from host cc32ef64 (MAXWarp) code=4, id=247, length=223
> > > > User-Name = "atest"
> > > > NAS-Identifier = 204.50.239.100
> > > > NAS-Port = 20117
> > > > NAS-Port-Type = 0
> > > > Class = "IEAS1\0038062\00211"
> > > > Acct-Status-Type = 2
> > > > Acct-Delay-Time = 0
> > > > Acct-Session-Id = "323011308"
> > > > Acct-Authentic = 1
> > > > Acct-Session-Time = 287
> > > > Acct-Input-Octets = 3376
> > > > Acct-Output-Octets = 1780
> > > > Acct-Input-Packets = 38
> > > > Acct-Output-Packets = 14
> > > > Ascend-Terminate-Cause = 45
> > > > Ascend-Connect-Progress = 60
> > > >
> > > > Any assistance will be appreciated.
> > > >
> > > > --
> > > > Mike Kovacich
> >
> >
For more information about this list (including removal) go to:
http://www.iea-software.com/support/maillists/liststart