and just cause you saw a firmware difference don't jump to any =
conclusions just yet....
is it just the boxes you mentioned?
are any other chassies doing this?
some times these things are not what they seem....
investigate it a bit.
-----Original Message-----
From: radiusnt-request@iea-software.com
[mailto:radiusnt-request@iea-software.com]On Behalf Of talon
Sent: Tuesday, January 18, 2000 1:46 PM
To: radiusnt@iea-software.com
Subject: RE: [RadiusNT] Radius problems..
Well.. the problem still exists.. and i upgraded all the max units to =
the newest software ver... any ideas?
---------- Original Message ----------------------------------
From: "talon" <talon@virtualight.net>
Reply-To: radiusnt@iea-software.com
Date: Tue, 18 Jan 2000 15:20:49 -0500
>Whoa.. you are right on the money!=20
>
>.5 is running
> Software +7.0.21e4
>
>.4 is running
>Software +7.0.3+
>
>whats a version *without* this bug...?
>---------- Original Message ----------------------------------
>From: "Denny Figuerres" <dennyf@inreach.com>
>Reply-To: radiusnt@iea-software.com
>Date: Tue, 18 Jan 2000 12:06:31 -0800
>
>>This may well be 100% wrong but just in case....
>>
>>when Ascend did the first few versions of 33.6 firmware for Max 4000's
>>there were bugs that caused the dynamic IP pool to get locked up and =
fail to assign addresses
>>properly.
>>
>>Since I see Ascend attributes and ports here I wonder if you might =
have a simmilar problem.
>>
>>Dynamic IP's are assigned by the firmware on the Terminal Server.
>>
>>check and see if anything like this is happening:
>>
>>as a box nears 100% in-use users get an address of 0.0.0.0 OR
>>you have login failures that on a Telnet show a message about no =
address avilible in pool.
>>you re-set the box and no problem for a while... ( hours / days ) and =
it starts happening again.
>>
>>also are all boxes on the same firm ware?=20
>>are the ones with the bad IP different versions of firmware that =
others?
>>
>>(we spent weeks tracking this down and then had to *PROVE* it before =
they fessed up to the bug!)
>>
>>-----Original Message-----
>>From: radiusnt-request@iea-software.com
>>[mailto:radiusnt-request@iea-software.com]On Behalf Of talon
>>Sent: Tuesday, January 18, 2000 11:51 AM
>>To: radiusnt@iea-software.com
>>Subject: [RadiusNT] Radius problems..
>>
>>
>>I am having problems with isdn accounts that have a dynamic ip =
assigned to them. Sometimes when they connect they get an ip of 0.0.0.0
>>How do I correct this? it happens at random.. here are 2 sepereate =
instances that i captured :
>>
>>Resp Time: 101 Auth: 0/0 -> 0 Acct: 5
>>radrecv: Request from host d8251b05 code
>> User-Name =3D "nab99"
>> NAS-Identifier =3D 216.37.27.5
>> NAS-Port =3D 10118
>> NAS-Port-Type =3D Sync
>> Acct-Status-Type =3D Start
>> Acct-Delay-Time =3D 3756
>> Acct-Session-Id =3D "301636870"
>> Acct-Authentic =3D RADIUS
>> Ascend-Multilink-ID =3D 14
>> Ascend-Num-In-Multilink =3D 2
>> Acct-Link-Count =3D 71
>> Acct-Multi-Session-ID =3D "0000000e"
>> Ascend-Modem-PortNo =3D 13
>> Ascend-Modem-SlotNo =3D 9
>> Caller-Id =3D "3178189476"
>> NAS-Port-DNIS =3D "1313"
>> Framed-Protocol =3D 262
>> Framed-Address =3D 0.0.0.0 <------------ Bad IP #1
>>
>>Resp Time: 50 Auth: 0/0 -> 0 Acct: 6
>>radrecv: Request from host d8251b04 code
>> User-Name =3D "pcc"
>> NAS-Identifier =3D 216.37.27.4
>> NAS-Port =3D 10104
>> NAS-Port-Type =3D Sync
>> Acct-Status-Type =3D Start
>> Acct-Delay-Time =3D 0
>> Acct-Session-Id =3D "304758527"
>> Acct-Authentic =3D RADIUS
>> Ascend-Modem-PortNo =3D 9
>> Ascend-Modem-SlotNo =3D 9
>> Caller-Id =3D "3174878272"
>> NAS-Port-DNIS =3D "1313"
>> Framed-Protocol =3D 262
>> Framed-Address =3D 0.0.0.0 <--------- bad ip #2
>>
>>
>>
>>For more information about this list (including removal) go to:
>>http://www.iea-software.com/support/maillists/liststart
>>
>>
>>For more information about this list (including removal) go to:
>>http://www.iea-software.com/support/maillists/liststart
>>
>
>For more information about this list (including removal) go to:
>http://www.iea-software.com/support/maillists/liststart
>
For more information about this list (including removal) go to:
http://www.iea-software.com/support/maillists/liststart
For more information about this list (including removal) go to:
http://www.iea-software.com/support/maillists/liststart