Jim
At 04:45 PM 1/18/2000 -0500, you wrote:
>Well.. the problem still exists.. and i upgraded all the max units to the
>newest software ver... any ideas?
>---------- Original Message ----------------------------------
>From: "talon" <talon@virtualight.net>
>Reply-To: radiusnt@iea-software.com
>Date: Tue, 18 Jan 2000 15:20:49 -0500
>
> >Whoa.. you are right on the money!
> >
> >.5 is running
> > Software +7.0.21e4
> >
> >.4 is running
> >Software +7.0.3+
> >
> >whats a version *without* this bug...?
> >---------- Original Message ----------------------------------
> >From: "Denny Figuerres" <dennyf@inreach.com>
> >Reply-To: radiusnt@iea-software.com
> >Date: Tue, 18 Jan 2000 12:06:31 -0800
> >
> >>This may well be 100% wrong but just in case....
> >>
> >>when Ascend did the first few versions of 33.6 firmware for Max 4000's
> >>there were bugs that caused the dynamic IP pool to get locked up and
> fail to assign addresses
> >>properly.
> >>
> >>Since I see Ascend attributes and ports here I wonder if you might have
> a simmilar problem.
> >>
> >>Dynamic IP's are assigned by the firmware on the Terminal Server.
> >>
> >>check and see if anything like this is happening:
> >>
> >>as a box nears 100% in-use users get an address of 0.0.0.0 OR
> >>you have login failures that on a Telnet show a message about no
> address avilible in pool.
> >>you re-set the box and no problem for a while... ( hours / days ) and
> it starts happening again.
> >>
> >>also are all boxes on the same firm ware?
> >>are the ones with the bad IP different versions of firmware that others?
> >>
> >>(we spent weeks tracking this down and then had to *PROVE* it before
> they fessed up to the bug!)
> >>
> >>-----Original Message-----
> >>From: radiusnt-request@iea-software.com
> >>[mailto:radiusnt-request@iea-software.com]On Behalf Of talon
> >>Sent: Tuesday, January 18, 2000 11:51 AM
> >>To: radiusnt@iea-software.com
> >>Subject: [RadiusNT] Radius problems..
> >>
> >>
> >>I am having problems with isdn accounts that have a dynamic ip assigned
> to them. Sometimes when they connect they get an ip of 0.0.0.0
> >>How do I correct this? it happens at random.. here are 2 sepereate
> instances that i captured :
> >>
> >>Resp Time: 101 Auth: 0/0 -> 0 Acct: 5
> >>radrecv: Request from host d8251b05 code
> >> User-Name = "nab99"
> >> NAS-Identifier = 216.37.27.5
> >> NAS-Port = 10118
> >> NAS-Port-Type = Sync
> >> Acct-Status-Type = Start
> >> Acct-Delay-Time = 3756
> >> Acct-Session-Id = "301636870"
> >> Acct-Authentic = RADIUS
> >> Ascend-Multilink-ID = 14
> >> Ascend-Num-In-Multilink = 2
> >> Acct-Link-Count = 71
> >> Acct-Multi-Session-ID = "0000000e"
> >> Ascend-Modem-PortNo = 13
> >> Ascend-Modem-SlotNo = 9
> >> Caller-Id = "3178189476"
> >> NAS-Port-DNIS = "1313"
> >> Framed-Protocol = 262
> >> Framed-Address = 0.0.0.0 <------------ Bad IP #1
> >>
> >>Resp Time: 50 Auth: 0/0 -> 0 Acct: 6
> >>radrecv: Request from host d8251b04 code
> >> User-Name = "pcc"
> >> NAS-Identifier = 216.37.27.4
> >> NAS-Port = 10104
> >> NAS-Port-Type = Sync
> >> Acct-Status-Type = Start
> >> Acct-Delay-Time = 0
> >> Acct-Session-Id = "304758527"
> >> Acct-Authentic = RADIUS
> >> Ascend-Modem-PortNo = 9
> >> Ascend-Modem-SlotNo = 9
> >> Caller-Id = "3174878272"
> >> NAS-Port-DNIS = "1313"
> >> Framed-Protocol = 262
> >> Framed-Address = 0.0.0.0 <--------- bad ip #2
> >>
> >>
> >>
> >>For more information about this list (including removal) go to:
> >>http://www.iea-software.com/support/maillists/liststart
> >>
> >>
> >>For more information about this list (including removal) go to:
> >>http://www.iea-software.com/support/maillists/liststart
> >>
> >
> >For more information about this list (including removal) go to:
> >http://www.iea-software.com/support/maillists/liststart
> >
>
>For more information about this list (including removal) go to:
>http://www.iea-software.com/support/maillists/liststart
----------------------------
hostmaster@interaxs.net
www.interaxs.net
InterNet Access Network
Voice: 937-461-3660 Fax:937-228-2773
For more information about this list (including removal) go to:
http://www.iea-software.com/support/maillists/liststart