>Whoa.. you are right on the money!
>
>.5 is running
> Software +7.0.21e4
>
>.4 is running
>Software +7.0.3+
>
>whats a version *without* this bug...?
>---------- Original Message ----------------------------------
>From: "Denny Figuerres" <dennyf@inreach.com>
>Reply-To: radiusnt@iea-software.com
>Date: Tue, 18 Jan 2000 12:06:31 -0800
>
>>This may well be 100% wrong but just in case....
>>
>>when Ascend did the first few versions of 33.6 firmware for Max 4000's
>>there were bugs that caused the dynamic IP pool to get locked up and fail to assign addresses
>>properly.
>>
>>Since I see Ascend attributes and ports here I wonder if you might have a simmilar problem.
>>
>>Dynamic IP's are assigned by the firmware on the Terminal Server.
>>
>>check and see if anything like this is happening:
>>
>>as a box nears 100% in-use users get an address of 0.0.0.0 OR
>>you have login failures that on a Telnet show a message about no address avilible in pool.
>>you re-set the box and no problem for a while... ( hours / days ) and it starts happening again.
>>
>>also are all boxes on the same firm ware?
>>are the ones with the bad IP different versions of firmware that others?
>>
>>(we spent weeks tracking this down and then had to *PROVE* it before they fessed up to the bug!)
>>
>>-----Original Message-----
>>From: radiusnt-request@iea-software.com
>>[mailto:radiusnt-request@iea-software.com]On Behalf Of talon
>>Sent: Tuesday, January 18, 2000 11:51 AM
>>To: radiusnt@iea-software.com
>>Subject: [RadiusNT] Radius problems..
>>
>>
>>I am having problems with isdn accounts that have a dynamic ip assigned to them. Sometimes when they connect they get an ip of 0.0.0.0
>>How do I correct this? it happens at random.. here are 2 sepereate instances that i captured :
>>
>>Resp Time: 101 Auth: 0/0 -> 0 Acct: 5
>>radrecv: Request from host d8251b05 code
>> User-Name = "nab99"
>> NAS-Identifier = 216.37.27.5
>> NAS-Port = 10118
>> NAS-Port-Type = Sync
>> Acct-Status-Type = Start
>> Acct-Delay-Time = 3756
>> Acct-Session-Id = "301636870"
>> Acct-Authentic = RADIUS
>> Ascend-Multilink-ID = 14
>> Ascend-Num-In-Multilink = 2
>> Acct-Link-Count = 71
>> Acct-Multi-Session-ID = "0000000e"
>> Ascend-Modem-PortNo = 13
>> Ascend-Modem-SlotNo = 9
>> Caller-Id = "3178189476"
>> NAS-Port-DNIS = "1313"
>> Framed-Protocol = 262
>> Framed-Address = 0.0.0.0 <------------ Bad IP #1
>>
>>Resp Time: 50 Auth: 0/0 -> 0 Acct: 6
>>radrecv: Request from host d8251b04 code
>> User-Name = "pcc"
>> NAS-Identifier = 216.37.27.4
>> NAS-Port = 10104
>> NAS-Port-Type = Sync
>> Acct-Status-Type = Start
>> Acct-Delay-Time = 0
>> Acct-Session-Id = "304758527"
>> Acct-Authentic = RADIUS
>> Ascend-Modem-PortNo = 9
>> Ascend-Modem-SlotNo = 9
>> Caller-Id = "3174878272"
>> NAS-Port-DNIS = "1313"
>> Framed-Protocol = 262
>> Framed-Address = 0.0.0.0 <--------- bad ip #2
>>
>>
>>
>>For more information about this list (including removal) go to:
>>http://www.iea-software.com/support/maillists/liststart
>>
>>
>>For more information about this list (including removal) go to:
>>http://www.iea-software.com/support/maillists/liststart
>>
>
>For more information about this list (including removal) go to:
>http://www.iea-software.com/support/maillists/liststart
>
For more information about this list (including removal) go to:
http://www.iea-software.com/support/maillists/liststart