If I have 2 ascends...
and the pool on Ascend #1 starts at 216.37.27.100
and the pool count is 46
then on ascend #2 the pool would start at 216.37.27.147 right?
---------- Original Message ----------------------------------
From: hostmaster@interaxs.net
Reply-To: radiusnt@iea-software.com
Date: Tue, 18 Jan 2000 16:55:01 -0500
>Are you sure that the pools are large enough on each MAX and that they do
>not overlap any addresses? What version did you upgrade to?
>
>Jim
>
>At 04:45 PM 1/18/2000 -0500, you wrote:
>>Well.. the problem still exists.. and i upgraded all the max units to the
>>newest software ver... any ideas?
>>---------- Original Message ----------------------------------
>>From: "talon" <talon@virtualight.net>
>>Reply-To: radiusnt@iea-software.com
>>Date: Tue, 18 Jan 2000 15:20:49 -0500
>>
>> >Whoa.. you are right on the money!
>> >
>> >.5 is running
>> > Software +7.0.21e4
>> >
>> >.4 is running
>> >Software +7.0.3+
>> >
>> >whats a version *without* this bug...?
>> >---------- Original Message ----------------------------------
>> >From: "Denny Figuerres" <dennyf@inreach.com>
>> >Reply-To: radiusnt@iea-software.com
>> >Date: Tue, 18 Jan 2000 12:06:31 -0800
>> >
>> >>This may well be 100% wrong but just in case....
>> >>
>> >>when Ascend did the first few versions of 33.6 firmware for Max 4000's
>> >>there were bugs that caused the dynamic IP pool to get locked up and
>> fail to assign addresses
>> >>properly.
>> >>
>> >>Since I see Ascend attributes and ports here I wonder if you might have
>> a simmilar problem.
>> >>
>> >>Dynamic IP's are assigned by the firmware on the Terminal Server.
>> >>
>> >>check and see if anything like this is happening:
>> >>
>> >>as a box nears 100% in-use users get an address of 0.0.0.0 OR
>> >>you have login failures that on a Telnet show a message about no
>> address avilible in pool.
>> >>you re-set the box and no problem for a while... ( hours / days ) and
>> it starts happening again.
>> >>
>> >>also are all boxes on the same firm ware?
>> >>are the ones with the bad IP different versions of firmware that others?
>> >>
>> >>(we spent weeks tracking this down and then had to *PROVE* it before
>> they fessed up to the bug!)
>> >>
>> >>-----Original Message-----
>> >>From: radiusnt-request@iea-software.com
>> >>[mailto:radiusnt-request@iea-software.com]On Behalf Of talon
>> >>Sent: Tuesday, January 18, 2000 11:51 AM
>> >>To: radiusnt@iea-software.com
>> >>Subject: [RadiusNT] Radius problems..
>> >>
>> >>
>> >>I am having problems with isdn accounts that have a dynamic ip assigned
>> to them. Sometimes when they connect they get an ip of 0.0.0.0
>> >>How do I correct this? it happens at random.. here are 2 sepereate
>> instances that i captured :
>> >>
>> >>Resp Time: 101 Auth: 0/0 -> 0 Acct: 5
>> >>radrecv: Request from host d8251b05 code
>> >> User-Name = "nab99"
>> >> NAS-Identifier = 216.37.27.5
>> >> NAS-Port = 10118
>> >> NAS-Port-Type = Sync
>> >> Acct-Status-Type = Start
>> >> Acct-Delay-Time = 3756
>> >> Acct-Session-Id = "301636870"
>> >> Acct-Authentic = RADIUS
>> >> Ascend-Multilink-ID = 14
>> >> Ascend-Num-In-Multilink = 2
>> >> Acct-Link-Count = 71
>> >> Acct-Multi-Session-ID = "0000000e"
>> >> Ascend-Modem-PortNo = 13
>> >> Ascend-Modem-SlotNo = 9
>> >> Caller-Id = "3178189476"
>> >> NAS-Port-DNIS = "1313"
>> >> Framed-Protocol = 262
>> >> Framed-Address = 0.0.0.0 <------------ Bad IP #1
>> >>
>> >>Resp Time: 50 Auth: 0/0 -> 0 Acct: 6
>> >>radrecv: Request from host d8251b04 code
>> >> User-Name = "pcc"
>> >> NAS-Identifier = 216.37.27.4
>> >> NAS-Port = 10104
>> >> NAS-Port-Type = Sync
>> >> Acct-Status-Type = Start
>> >> Acct-Delay-Time = 0
>> >> Acct-Session-Id = "304758527"
>> >> Acct-Authentic = RADIUS
>> >> Ascend-Modem-PortNo = 9
>> >> Ascend-Modem-SlotNo = 9
>> >> Caller-Id = "3174878272"
>> >> NAS-Port-DNIS = "1313"
>> >> Framed-Protocol = 262
>> >> Framed-Address = 0.0.0.0 <--------- bad ip #2
>> >>
>> >>
>> >>
>> >>For more information about this list (including removal) go to:
>> >>http://www.iea-software.com/support/maillists/liststart
>> >>
>> >>
>> >>For more information about this list (including removal) go to:
>> >>http://www.iea-software.com/support/maillists/liststart
>> >>
>> >
>> >For more information about this list (including removal) go to:
>> >http://www.iea-software.com/support/maillists/liststart
>> >
>>
>>For more information about this list (including removal) go to:
>>http://www.iea-software.com/support/maillists/liststart
>
>----------------------------
>hostmaster@interaxs.net
>www.interaxs.net
>InterNet Access Network
>Voice: 937-461-3660 Fax:937-228-2773
>
>For more information about this list (including removal) go to:
>http://www.iea-software.com/support/maillists/liststart
>
For more information about this list (including removal) go to:
http://www.iea-software.com/support/maillists/liststart