..5 is running
Software +7.0.21e4
..4 is running
Software +7.0.3+
whats a version *without* this bug...?
---------- Original Message ----------------------------------
From: "Denny Figuerres" <dennyf@inreach.com>
Reply-To: radiusnt@iea-software.com
Date: Tue, 18 Jan 2000 12:06:31 -0800
>This may well be 100% wrong but just in case....
>
>when Ascend did the first few versions of 33.6 firmware for Max 4000's
>there were bugs that caused the dynamic IP pool to get locked up and fail to assign addresses
>properly.
>
>Since I see Ascend attributes and ports here I wonder if you might have a simmilar problem.
>
>Dynamic IP's are assigned by the firmware on the Terminal Server.
>
>check and see if anything like this is happening:
>
>as a box nears 100% in-use users get an address of 0.0.0.0 OR
>you have login failures that on a Telnet show a message about no address avilible in pool.
>you re-set the box and no problem for a while... ( hours / days ) and it starts happening again.
>
>also are all boxes on the same firm ware?
>are the ones with the bad IP different versions of firmware that others?
>
>(we spent weeks tracking this down and then had to *PROVE* it before they fessed up to the bug!)
>
>-----Original Message-----
>From: radiusnt-request@iea-software.com
>[mailto:radiusnt-request@iea-software.com]On Behalf Of talon
>Sent: Tuesday, January 18, 2000 11:51 AM
>To: radiusnt@iea-software.com
>Subject: [RadiusNT] Radius problems..
>
>
>I am having problems with isdn accounts that have a dynamic ip assigned to them. Sometimes when they connect they get an ip of 0.0.0.0
>How do I correct this? it happens at random.. here are 2 sepereate instances that i captured :
>
>Resp Time: 101 Auth: 0/0 -> 0 Acct: 5
>radrecv: Request from host d8251b05 code
> User-Name = "nab99"
> NAS-Identifier = 216.37.27.5
> NAS-Port = 10118
> NAS-Port-Type = Sync
> Acct-Status-Type = Start
> Acct-Delay-Time = 3756
> Acct-Session-Id = "301636870"
> Acct-Authentic = RADIUS
> Ascend-Multilink-ID = 14
> Ascend-Num-In-Multilink = 2
> Acct-Link-Count = 71
> Acct-Multi-Session-ID = "0000000e"
> Ascend-Modem-PortNo = 13
> Ascend-Modem-SlotNo = 9
> Caller-Id = "3178189476"
> NAS-Port-DNIS = "1313"
> Framed-Protocol = 262
> Framed-Address = 0.0.0.0 <------------ Bad IP #1
>
>Resp Time: 50 Auth: 0/0 -> 0 Acct: 6
>radrecv: Request from host d8251b04 code
> User-Name = "pcc"
> NAS-Identifier = 216.37.27.4
> NAS-Port = 10104
> NAS-Port-Type = Sync
> Acct-Status-Type = Start
> Acct-Delay-Time = 0
> Acct-Session-Id = "304758527"
> Acct-Authentic = RADIUS
> Ascend-Modem-PortNo = 9
> Ascend-Modem-SlotNo = 9
> Caller-Id = "3174878272"
> NAS-Port-DNIS = "1313"
> Framed-Protocol = 262
> Framed-Address = 0.0.0.0 <--------- bad ip #2
>
>
>
>For more information about this list (including removal) go to:
>http://www.iea-software.com/support/maillists/liststart
>
>
>For more information about this list (including removal) go to:
>http://www.iea-software.com/support/maillists/liststart
>
For more information about this list (including removal) go to:
http://www.iea-software.com/support/maillists/liststart