Re: Fw: [RadiusNT] CVX Nortel Accounting packets

Mourad Dahoumane ( (no email) )
Wed, 3 Nov 1999 23:51:11 +0100

I created the second entry as you said and it works !
I will see if I can remove the first entry to avoid any double accounting.
the cvx has about 4 or 6 thousands ports !! I have setup the task to run
daily to create the new ports it can see.

Thank you for your patience

Mourad Dahoumane
----- Original Message -----
From: Dale E. Reed Jr. <daler@iea-software.com>
To: <radiusnt@iea-software.com>
Sent: Wednesday, November 03, 1999 6:49 PM
Subject: Re: Fw: [RadiusNT] CVX Nortel Accounting packets

> Mourad Dahoumane wrote:
> >
> > I ran the updtports scripts but still I can't see nothing on the view
> > online. It seems that everything is recorded
> > but I don't get all the info.
> > For example , if go to check the time inline in the subaccount and click
on
> > update, I get only the local nas (195.61.225.4) records
> > but if I check quick update I get the cvs as well. Still , on the cvx
the
> > columns "Terminate cause","Server" and "connect Info" are empty.
> >
> > is it a trigger that is not working for this server or because some
> > attributes are not the same ?
> >
> > UserName CallDate Mins NASIdentifie NASPort
Connect
> > Info
> > sen 31/10/199 12.45 195.61.225.4 0 44000
> > LAPM/V42BIS 9
> > sen 31/10/199 1.88 195.61.225.4 1 44000
> > LAPM/V42BIS
> > sen 31/10/199 1.95 195.61.225.4 1 44000
> > MNP/NONE
> > sen 31/10/199 42.98 195.61.225.4 2 44000
> > LAPM/V42BIS
> > sen 01/11/199 12.25 195.61.225.4 4 44000
> > MNP/NONE
> > sen 01/11/199 8.88 CVX1 1037
> > sen 01/11/199 43.08 CVX1 1025
> > sen 02/11/199 90.50 CVX1 1027
> > sen 02/11/199 11.63 CVX1 1037
> > sen 03/11/199 138.08 CVX1 1058
>
>
> First, does the CVX Send two NAS-Identifier attributes (actually, is
> it sending NAS-IP-Address and NAS-Identifier, but your dictionary has
> both of those attributes as NAS-Identifier)?
>
> Secondly, try adding two entries for the CVX. The first should have the
> IP address field as the actual IP of the NAS, and the second entry
> should
> have the IP Address as the "CVX1" or whatever its sending in the
> NAS-Identifier field.
>
> Emerald tries to match the NAS-Identifier to the IP Address of the NAS,
> but if its sending a name as the NAS-Identifier, then that will not
> work (hence you need the second entry).
>
> --
>
> Dale E. Reed Jr. Emerald and RadiusNT
> __________________________________________
> IEA Software, Inc. www.iea-software.com
>
> For more information about this list (including removal) go to:
> http://www.iea-software.com/support/maillists/liststart

For more information about this list (including removal) go to:
http://www.iea-software.com/support/maillists/liststart