Re: [RadiusNT] Problem with multiple Stop records

Dale E. Reed Jr. ( (no email) )
Fri, 23 Jul 1999 10:13:18 -0700

Kelly Peterson wrote:
>
> We have a Livingston PortMaster PM-2e running ComOS 3.7.2. We are getting
> many duplicate stop records in the accounting logs. We are running
> RadiusNT version 2.5.124. I ran radius in debug mode, some of the output
> is shown below. It looks like the PM is not recognising the acks. Any
> help would be appreciated!

Does the machine RadiusNT is running on, have multiple IP Addresses?
If so, use the RadiusNT admin to bind to one specific one, and it will
correct the problem.

> Thanks.
>
> radrecv: Request from host cfe52208 code=4, id=22, length=118
> Acct-Session-Id = "35000151"
> User-Name = "kelectri"
> NAS-Identifier = 207.229.34.8
> NAS-Port = 15
> NAS-Port-Type = Async
> Acct-Status-Type = Stop
> Acct-Session-Time = 365
> Acct-Authentic = RADIUS
> Acct-Input-Octets = 17879
> Acct-Output-Octets = 1221
> Acct-Disconnect-Reason = 2
> User-Service-Type = 2
> Framed-Protocol = PPP
> Framed-Address = 207.229.34.211
> Acct-Delay-Time = 33
> Sending Accounting Ack of id 22 to cfe52208 (netgate5)
>
> radrecv: Request from host cfe52208 code=4, id=22, length=118
> Acct-Session-Id = "35000151"
> User-Name = "kelectri"
> NAS-Identifier = 207.229.34.8
> NAS-Port = 15
> NAS-Port-Type = Async
> Acct-Status-Type = Stop
> Acct-Session-Time = 365
> Acct-Authentic = RADIUS
> Acct-Input-Octets = 17879
> Acct-Output-Octets = 1221
> Acct-Disconnect-Reason = 2
> User-Service-Type = 2
> Framed-Protocol = PPP
> Framed-Address = 207.229.34.211
> Acct-Delay-Time = 65
> Sending Accounting Ack of id 22 to cfe52208 (netgate5)
>
> Resp Time: 10 Auth: 10/1 -> 6 Acct: 18/0/0 -> 18
>
> For more information about this list (including removal) go to:
> http://www.iea-software.com/support/maillists/liststart

-- 

Dale E. Reed Jr.      Emerald and RadiusNT__________________________________________IEA Software, Inc.    www.iea-software.com

For more information about this list (including removal) go to:http://www.iea-software.com/support/maillists/liststart