Re: [RadiusNT] radlogin

Dale E. Reed Jr. ( (no email) )
Sat, 19 Jun 1999 12:06:23 -0700

Mike Kovacich wrote:
>
> "Dale E. Reed Jr." wrote:
>
> > Mike Kovacich wrote:
> > >
> > > I am testing RadiusNT 2.5 and text user authenticate fine but does not see any users I put
> > > in SubAccounts. Here is the output from radlogin with user n and password n
> > >
> > > radrecv: Request from host 7f000001 code=1, id=10, length=53
> > > NAS-IP-Address = 127.0.0.1
> > > NAS-Port = 0
> > > User-Name = "n"
> > > Password = "\243L\253\037\020?lC\270Q\017y\222=\242j"
> > > rad_auth(): user_find(n) error = Neither User Nor Default Name
> > > Authenticate: from 127.0.0.1 - Neither User Nor Default Name: n
> > >
> > > Sending Reject of id 10 to 7f000001 (127.0.0.1)
> > > Resp Time: 10 Auth: 0/4 -> 4 Acct: 0/0/0 -> 0
> >
> > If RadiusNT in running in text mode, it has no ODBC hooks at all. You
> > need to either run it in ODBC or BOTH mode.
>
>
> While in OBDC mode only authentication would happen with users in the client file. Text was not
> turned on.

Did you restart RadiusNT after changing that option? RadiusNT does NOT
look at the users file in ODBC mode, unless you have text backup
checked.

-- 

Dale E. Reed Jr. Emerald and RadiusNT__________________________________________IEA Software, Inc. www.iea-software.com