Vendor Model Base OID Comments
BayNetworks\Nortel 5399 .1.3.6.1.4.1.15.2.16.1.2.1.3.1.x
Vendor Model ServerType SNMP Method
BayNetworks\Nortel 5399 (Starts at 1) <none yet> Use SNMPUser as OID
-----Original Message-----
From: Dale E. Reed Jr. <daler@iea-software.com>
To: radiusnt@iea-software.com <radiusnt@iea-software.com>
Date: Tuesday, June 08, 1999 2:52 PM
Subject: Re: [RadiusNT] ODBC: SQLExecDirect Error.
>Brian Lube wrote:
>>
>> The documentation for this area of RadiusNT is a bit strange. I could
not
>> find accurate docs for the servertype field to create it in the servers
>> table. I checked both the web site and the docs. Maybe I missed
>> something, but I'm not using a select on server type. From your
questions
>> I'm going to assume that this is going to be the problem. Could you give
>> me more detailed information about the ServerTypes field and how it
should
>> be set?
>
>The ServerType was only added in RadiusNT 2.5.175. I added some
>information
>about it in to the SNMP Concurrency FAQ at:
>
>http://www.iea-software.com/radiusnt/faqs/SNMP-Concurrency.html
>
>Basically, the SNMPUser is used as is, except for the Ascends, which
>we add the AcctSessionID to the end of beforing sending it.
>
>> I'm contacting a USR/3com HiPerARC in this situation SNMPuser field of
>> .1.3.6.1.4.1.429.4.10.1.1.18.1257 which does SNMPget to modem one of slot
>> one on the ARC (which is where the initial connection is.
>
>
>
>
>--
>
>Dale E. Reed Jr. Emerald and RadiusNT
>__________________________________________
>IEA Software, Inc. www.iea-software.com