Ok. Its unofficially 14.
> -----Original Message-----
> From: Dale E. Reed Jr. <daler@iea-software.com>
> To: radiusnt@iea-software.com <radiusnt@iea-software.com>
> Date: Tuesday, June 08, 1999 2:52 PM
> Subject: Re: [RadiusNT] ODBC: SQLExecDirect Error.
>
> >Brian Lube wrote:
> >>
> >> The documentation for this area of RadiusNT is a bit strange. I could
> not
> >> find accurate docs for the servertype field to create it in the servers
> >> table. I checked both the web site and the docs. Maybe I missed
> >> something, but I'm not using a select on server type. From your
> questions
> >> I'm going to assume that this is going to be the problem. Could you give
> >> me more detailed information about the ServerTypes field and how it
> should
> >> be set?
> >
> >The ServerType was only added in RadiusNT 2.5.175. I added some
> >information
> >about it in to the SNMP Concurrency FAQ at:
> >
> >http://www.iea-software.com/radiusnt/faqs/SNMP-Concurrency.html
> >
> >Basically, the SNMPUser is used as is, except for the Ascends, which
> >we add the AcctSessionID to the end of beforing sending it.
> >
> >> I'm contacting a USR/3com HiPerARC in this situation SNMPuser field of
> >> .1.3.6.1.4.1.429.4.10.1.1.18.1257 which does SNMPget to modem one of slot
> >> one on the ARC (which is where the initial connection is.
> >
> >
> >
> >
> >--
> >
> >Dale E. Reed Jr. Emerald and RadiusNT
> >__________________________________________
> >IEA Software, Inc. www.iea-software.com
--Dale E. Reed Jr. Emerald and RadiusNT__________________________________________IEA Software, Inc. www.iea-software.com