Re: [Emerald] NAS Setup

Ben Conner ( ben@webworldinc.com )
Sat, 27 Mar 1999 09:28:07 -0800

At 07:13 PM 3/26/99 -0800, you wrote:
>Ed and Kathy Tate wrote:
>>
>> List,
>>
>> We have just recently starting running radius NT 2.5 and Emerald 2.5.261.
>> We are using all Livingston/Lucent PM III's. In
>> the Emerald Admin when setting up the NAS's it asks for ports and modems.
>> We are using PRI (1 D Channel Each), 4 10port cards and 1 8prt card giving
>> us 48ports, but only 46 lines per PM III (due to the single D ch. for each
>> PRI leaving 23+23 for a total of 46). Should I have it configured in
>> Emerald admin as 46 ports and 46 modems or as 48 and 48?
>
>The modems line is informational only.
>
>You should put 48 ports. The PM uses 0 for the s0 port and the first
>PRI/TC is 1-24 (24 is not used for a PRI). The second WAN is 24-48
>(48 is not used for a PRI).
>
Dale,

Are you saying the numbering for ports on a PRI for a PM3 go from 0-23, skips
24, and picks up with 25-46? Wouldn't that leave 46 ports to be defined in the
ports section? I've had mine defined as 46 rather than 48. What problems
would that have caused?

--Ben
+--------------------------------------------------------------------------+
+ Ben Conner ben@webworldinc.com +
+ Web World, Inc. (714) 639-0595 voice +
+ PO Box 6548-107 (714) 744-4825 fax +
+ Orange, Ca 92863 +
+--------------------------------------------------------------------------+

For more information about this list, including removal,
please see http://www.iea-software.com/maillist.html