Sorry, can't help on the 128 address conversion as I don't use it enough.
It's also in the Ascend manuals.
-----Original Message-----
From: Ken Sorenson <ksoren@tsi-online.com>
To: radiusnt@iea-software.com <radiusnt@iea-software.com>
Date: Thursday, August 20, 1998 11:26 AM
Subject: RE: Framed-Route
>Thanks for the response. One more ignorant question... I am not familiar
>with the conversion.. what process do I use to resolve 255.255.255.224 to
>/27? Ect...
>
>-----Original Message-----
>From: radiusnt-request@iea-software.com
>[mailto:radiusnt-request@iea-software.com] On Behalf Of Dale E. Reed Jr.
>Sent: Thursday, August 20, 1998 1:35 AM
>To: radiusnt@iea-software.com
>Subject: Re: Framed-Route
>
>Ken Sorenson wrote:
>>
>> Hello Dale.. I am wondering if my problem is related to this. I am trying
>to
>> place specific route in my Emerald subacounts with little success. I am
>> using 3com/TC Hyperarcs.. When I Place the routes statically in the
>Hyperarc
>> they work.. When I use Framed-Route in RadiusNT, It seems to disregard
the
>> whole statement. I see it loading in -x15, however nothing changes in my
>> route table.
>>
>> Ex:
>> Framed-Route 201.92.75.11 255.255.255.255 208.167.95.3 2
>> Or
>> Framed-Route 201.92.75.64 255.255.255.224 208.167.95.3 2
>>
>> I have utilized the Framed-Address, and Framed-Netmask...
>
>The format for Framed-Route is:
>
>x.x.x.x/yy z.z.z.z
>
>Where x.x.x.x is the source address and yy is the subnet. z.z.z.z
>is the gateway for it.
>
>> I figure I am missing something obvious.
>>
>> Also, I am getting two unknown attributes, 50 and 51. From the 3com docs
>it
>> appears that 50=Account-Multi-Session-Id, 51=Account-Link-Count. How
>should
>> do I add these?
>
>Either using the Emerald Admin, Config Radius, or directory to the
>RadAttriutes table.
>
>--
>Dale E. Reed Jr. (daler@iea-software.com)
>_________________________________________________________________
> IEA Software, Inc. | RadiusNT, Emerald, and NT FAQs
> Internet Solutions for Today | http://www.iea-software.com
>