Is the system a member of the IDEASIGN domain? If so, you really
shouldn't need to domain designator, as NT will try the local, and
then the domain is a local isn't found.
> Sandy
>
> -----Original Message-----
> From: radiusnt-request@iea-software.com
> [mailto:radiusnt-request@iea-software.com]On Behalf Of Dale E. Reed Jr.
> Sent: Thursday, August 13, 1998 2:28 PM
> To: radiusnt@iea-software.com
> Subject: Re: FW: Password Replace not working on NT
>
> ssilver@ideasign.com wrote:
> >
> > We have just implemented RadiusNT V2.5.xxx and want to use the NT password
> > replace option. The machine radius is an NT server but not a domain
> > controller. We tested this using WINNT as the default password and
> placing
> > the test users into NT as local users. This worked OK. However, when we
> > put the server on the network and changed the default password to
> > WINNT/DOMAIN (with our domain being called IDEASIGN), we do not get
> password
> > replacement. Is there some requirement that the machine be a PDC or BDC
> > that isn't documented? What do we need to do to get this working?
>
> So the password replacement did work with just WINNT but didn't work
> with WINNT\DOMAIN?
>
> --
> Dale E. Reed Jr. (daler@iea-software.com)
> _________________________________________________________________
> IEA Software, Inc. | RadiusNT, Emerald, and NT FAQs
> Internet Solutions for Today | http://www.iea-software.com
-- Dale E. Reed Jr. (daler@iea-software.com)_________________________________________________________________ IEA Software, Inc. | RadiusNT, Emerald, and NT FAQs Internet Solutions for Today | http://www.iea-software.com