Re: Dedicated IP, Connection

Dale E. Reed Jr. ( (no email) )
Tue, 16 Jun 1998 11:56:07 -0700

jason@cnx.net wrote:
>
> We have a customer, currently connecting through a LINUX box successfully,
> his entry in the users file looks like:
>
> oce Password = "xxxxxx"
> User-Service = Framed-User, Framed-Protocol = PPP,
> Framed-MTU = 1500,
> Framed-Routing = Broadcast-Listen,
> Ascend-Send-Auth = Send-Auth-PAP,
> Framed-Address = 206.87.114.243,
> Framed-Netmask = 255.255.255.0,
> Ascend-Idle-Limit = 0,
> Framed-Compression = Van-Jacobsen-TCP-IP
>
> I have been told to try to duplicate this entry in the radconfigs table, so
> here is what I have in the radconfigs now:

The RadConfigID columun is just a key and not needed.

You didn't include the value column, which is used on many of these.
For Example:

AccountID RadAttributeID Data Value
2610 6 Framed-User 2
2610 7 PPP 1
2610 8 206.87.114.243 0
2610 9 255.255.255.0 0
2610 10 Broadcast-Listen 3
2610 12 1500 1500
2610 13 Van-Jacobsen-TCP-IP 1
2610 231 Send-Auth-PAP 1
2610 244 0 0

For types of Integer (which almost all of these are) the value
column is used, NOT the data column. 

-- Dale E. Reed Jr.  (daler@iea-software.com)_________________________________________________________________       IEA Software, Inc.      |  RadiusNT, Emerald, and NT FAQs Internet Solutions for Today  |   http://www.iea-software.com