If you want to open both subnets, I do not understand why you don't just use
one NIC in server 1. Am I missing something?
Juergen
-----Ursprüngliche Nachricht-----
Von: Dan Waldron <dan@diversified.com.au>
An: ntisp@iea-software.com <ntisp@iea-software.com>
Datum: Samstag, 25. Juli 1998 12:46
Betreff: Re: Routing?
>They are all netmask 255.255.255.0 (203.29.98 is a class C), Server 1
>(203.29.98.1) is connected to the net via an ISDN TA. Aside from the net
>connection, on the internal network 203.29.98.6 can't ping 203.29.98.254,
>(NIC 2 on Server 2) but CAN ping 203.29.98.2 (NIC 1 on Server 2) RRAS is
>not installed on any of the PCs.
>
>Rgds
>Dan
>
>-------------------------------------------
>Dan Waldron
>Diversified Data
>dan@diversified.com.au
>http://www.diversified.com.au
>Ph: 0417-659-828 (+61-417-659-828)
>Fx: 02-9832-0951 (+61-2-9832-0951)
>
>-----Original Message-----
>From: Kevin Ingram <kingram@cameron.net>
>To: ntisp@iea-software.com <ntisp@iea-software.com>
>Date: Saturday, 25 July 1998 20:14
>Subject: Re: Routing?
>
>
>>What are the netmasks for each network?
>>Which machine is connected to the Internet and how?
>>Are you running RRAS on these servers?
>>
>>Kevin Ingram
>>
>>-----Original Message-----
>>From: Dan Waldron <dan@diversified.com.au>
>>To: ntisp <ntisp@iea-software.com>
>>Date: Saturday, July 25, 1998 2:23 AM
>>Subject: Routing?
>>
>>
>>>Good evening everyone, whereever you may be. I have a little scenario I
>>>would like you to consider. It's two networks linked together through a
>>>server that is not directly connected to the net. Here is the topology:
>>>
>>>
>>>
>>>Internet -> Server 1: 203.29.98.1 -> Server 2 (NIC 1): 203.29.98.2 ->
>>Server
>>>2 (NIC 2): 203.29.98.254 -> Client 1: 203.29.98.253
>>>
>>>Server 1 can see Server 2 (NIC1) OK but can't see Server 2 (NIC 2). As a
>>>result, Client 1 will not be able to see the Internet (I assume). Another
>>>Client (Client 2) - (203.29.98.6) which is part of the network that
Server
>>1
>>>and Server 2 (NIC 1) can still see the net OK but can't see Server 2 (NIC
>>>2).
>>>
>>>I assume this is a routing thing. What do I have to do, and on which
>>>machine, to get the network running correctly?
>>>
>>>Any assistance appreciated.
>>>
>>>Regards
>>>Dan
>>>
>>>-------------------------------------------
>>>Dan Waldron
>>>Diversified Data
>>>dan@diversified.com.au
>>>http://www.diversified.com.au
>>>Ph: 0417-659-828 (+61-417-659-828)
>>>Fx: 02-9832-0951 (+61-2-9832-0951)
>>>
>>>
>>
>
>
>