Re: USR (3 Com) Netserver 8/I plus

Ted Cekan ( (no email) )
Tue, 30 Dec 1997 23:35:29 -0700

Thanks for all your help. It is working now. I got some more info from
3com. It will work with any of their box boxes if you set up:
Framed-Address = 255.255.255.254
Framed-Netmask = 255.255.255.255
This works with my NetServer Plus, NetServer, and Total Control.

Ted

----------
> From: Tim Pitman <timdp@tdpnet.com>
> To: RadiusNT@iea-software.com
> Subject: Re: USR (3 Com) Netserver 8/I plus
> Date: Tuesday, December 30, 1997 2:41 PM
>
> Ted,
>
> Here is everything I had to do, and yes it will affect all NASs.
>
> 1) Don't worry about changing User-Service to User-Service-Type, this
does
> not matter.
> 2) You must have these entries for the 8/I plus:
> Framed-Address = 0.0.0.0
> Framed-Netmask = 255.255.255.255
> 3) Here is an example of my config (Note: this does not work on the non
> "plus" model(OS version 3.2.5) requires OS 4.00.13 or newer, either
upgrade
> or delete Framed-Address config)
> User-Service = Framed-User (2)
> Framed-Protocol = PPP (1)
> Session-Timeout = 28800 (28800)
> Idle-Timeout = 1200 (1200)
> Framed-Address = 0.0.0.0 (0)
> Framed-Netmask = 255.255.255.255 (0)
> Framed-Routing = Framed-Routing (0)
> Framed-MTU = Framed-MTU (1500)
> Framed-Compression = Framed-Compression (1)
>