We have been using these for a while. I know quite a bit about them.
It would be easier for me to help you over the phone if you want to give
me a call.
Steve Coleman
Computer Solutions
801-486-7043
David Payer wrote:
>
> I just bought a used Netserver 16i and something isn't quite right. If
> someone has experience with this, give me a perspective please.
>
> I can telnet into the unit but can't use the USR software to configure the
> unit. I believe I have the ports setup alright since it is very similar to
> the portmaster setup. My concern is the modems themselves. I have a MPi-16
> and we had to run a setup program to configure each modem to recognize the
> spids they were connected to. I see nothing in the documents for doing
> something along this line.
>
> Is this needed on the Netserver 16i or does it autorecognize the spids and
> type of switch?
>
> (Very interesting regarding the USR software, it doesn't open the port. It
> didn't work with a serial connection or the lan connection but the system
> setup fine via telnet using the old IP address to get started.)
>
> TIA
>
> David Payer
> OMNI Internet
>
> ----------------------------------------------------------
> NTISP Mailing List listserver@emerald.iea.com