I had a caller one time call in asking for a dedicated ip , with the
intention to NOT be a full time connection, but just a dial-in connection.
This would still not be workable... right ?
-Ric
At 01:57 PM 7/23/97 +0800, you wrote:
>YES JUST SET THE IP ADRESS IN THE TCP/IP SETTINGS ATATCHED TO THE MODEM
>CONFIGURATION, I HAVE THAT RUNNING ON SEVERAL SERVERS AND LEASED LINES FOR
>OVER A YEAR.
>NOTE; IN THE ADVANCED SETTINGS FOR THE MODEM YOU NEED ALSO TO SET SOME
>PARAMETERS (AT COMMANDS) SUCH AS DETECT NO DIAL TONE, RECEIVE ON AND YOU
>HAVE TO SET A FICTIOUS DIAL NUMBER ( IF THEY HAVE A LEASED LIEN AND NOR
>DIAL UP LINE)
>BERNHARD
>
>At 12:52 PM 7/23/97 +1000, you wrote:
>>I have a user who has a permanent modem connection and requires his IP to
>>be set. I can do this by allowing remote callers to request an IP, and I
>>can also do it with Virtual Motion's Remote Access Manager. For just one
>>port it seems too expensive a solution, when I probably won't use the other
>>features.
>>
>>Is there another way around this problem?
>>
>>Rgds
>>Dan
>>------------------------------------------------------------------------
>>Dan Waldron
>>Diversified Data
>>dan@divdat.com.au
>>Ph: +61-412-831-677
>>Fax: +61-2-9832-0951
>>
>> ----------------------------------------------------------
>> NTISP Mailing List listserver@emerald.iea.com
>>
>>
>>
>
> ----------------------------------------------------------
> NTISP Mailing List listserver@emerald.iea.com
>
>
=====================================================================
Richard Fink Tel: 415 381-0215
WorldPassage Fax: 415 381-0822
P.O.Box 2339 rfink@worldpassage.net
Mill Valley, CA 94942 http://www.worldpassage.net
WorldPassage is a Premier Internet Service Provider
owned and operated by RainTree Computer Systems, Inc.