Re: Newbie question on NT Routing

Fox, Thomas L. ( tfox@foxberry.com )
Sun, 20 Jul 1997 11:07:48 -0400

1. What is the default gatway on the Win95 box?
2. Are these addresses you're using assigned by your
upstream provider, or are they private-space addresses?
3. What does the routing table on the WinNT & Win95 boxes
look like.

At 10:18 p 7/20/97 -0000, you wrote:
>Hello.
>
>I have a problem pinging other machines on the internet from my Win95
>workstation. Here is my setup:
>
>My Win95 workstation ( IP address = 172.31.1.2 [255.255.0.0] ) is connected
>via LAN to my NT 4 server machine ( IP Address = 172.31.1.1 [255.255.0.0]
>).
>
>This NT4 server ( SP3 w/ SteelHead official release ) machine has a dial-up
>connection to the internet.
>
>On this NT4 machine, I can ping any machine on the internet. This was after
>I set a static default route as follows:
>
>1. Destination = 0.0.0.0
>2. Network mask = 0.0.0.0
>3. Gateway = 206.101.197.225
>4. Interface = Demand_Dial
>5. Metric = 1
>6. Protocol = local
>
>When I ping from my Win95 workstation, I keep getting a "Request timed out"
>message.
>
>Can anybody please tell me what else I must do to make things work ?
>
>- Danny Sinang
>
>
>
>Danny Sinang
>sinang@skyinet.net
>http://www.adgrafix.com/info/dsinang/
>
>
> ----------------------------------------------------------
> NTISP Mailing List listserver@emerald.iea.com
>
>