Re: Newbie question on NT Routing

Jim ( (no email) )
Sun, 20 Jul 1997 10:43:25 -500

Have you made a persistant routing entry on the NT box to route all
of your 172.31.1.0 block to it's NIC?

Jim

>
> I have a problem pinging other machines on the internet from my
> Win95 workstation. Here is my setup:
>
> My Win95 workstation ( IP address = 172.31.1.2 [255.255.0.0] ) is
> connected via LAN to my NT 4 server machine ( IP Address =
> 172.31.1.1 [255.255.0.0] ).
>
> This NT4 server ( SP3 w/ SteelHead official release ) machine has a
> dial-up connection to the internet.
>
> On this NT4 machine, I can ping any machine on the internet. This
> was after I set a static default route as follows:
>
> 1. Destination = 0.0.0.0
> 2. Network mask = 0.0.0.0
> 3. Gateway = 206.101.197.225
> 4. Interface = Demand_Dial
> 5. Metric = 1
> 6. Protocol = local
>
> When I ping from my Win95 workstation, I keep getting a "Request
> timed out" message.
>
> Can anybody please tell me what else I must do to make things work ?
>
> - Danny Sinang
>
>
>
> Danny Sinang
> sinang@skyinet.net
> http://www.adgrafix.com/info/dsinang/
>
>
> ----------------------------------------------------------
> NTISP Mailing List listserver@emerald.iea.com
>