At 02:15 PM 2/22/97 +0800, you wrote:
>At 10:20 AM 2/20/97 +1100, you wrote:
>>
>>
>>> This is my situation :
>>> Ciscopro 2511
>>> Radius-Nt .60 with odbc
>>> Win NT Server 4.0
>>
>>Soffia,
>>
>>I am in the process of switching to RadiusNT, I am also using a Cisco 2511,
>>
>>I was wondering if you could send me a copy of your RadiusNT configuration
>>and also your 2511 config. (There is a distinct lack of information on
>>getting
>>these two products to work together...)
>>
>>Thanks
>>
>>Andrew
>>
>>-
>>RadiusNT Mailing list (radiusnt@iea.com)
>>
>Hi,
>My situration is:
> cisco 2511 with ios 11.1
> radius-nt .49
> win NT server 3.51
>
>The configuration in cisco 2511 for radius is:
>
>AAA NEW-MODEL
>AAA AUTHENTICATION PPP DEFAULT RADIUS
>AAA AUTHORIZATION NETWORK IF-AUTHENTICATED
>AAA ACCOUNTING NETWORK START-STOP RADIUS
>
>RADIUS-SERVER HOST 10.1.1.1
>RADIUS-SERVER KEY 1234
>
>I run radius nt as a service in nt. The authenticate and accounting is ok.
>But after I start
>cisco aaa to radius I meet a serious problem. Most time after enable aaa to
>radius authenticat mode
>24 hours, the lan port in cisco 2511 will not work properly. At that time
>you can not ping any other
>hots in your lan segment. I find at that time cisco 2511 can not perform a
>complete arp operation.
>So the only way to solve this problem is reboot the cisco 2511. But after 24
>hours thr problem appear
>in 2511 again. After I remove all the configuration for radius in cisco 2511
>the problrm disappear.
>So I think the problem is related with the radius configuration.
>
>I just config my first 2511 to use radius do authenticate and accounting. So
>until to now I did
>not find a way to use radius in 2511 propely. Any idea ?
>
>Suyue Zhou
>
>-
>RadiusNT Mailing list (radiusnt@iea.com)
>
David Edwards
System Administrator - Oakweb.com
Lake Tahoe's Premier Internet Service Provider
1-800-61-TAHOE
-
RadiusNT Mailing list (radiusnt@iea.com)