Re: Modem Hangup

Jared Groves ( (no email) )
Mon, 26 May 1997 23:00:08 -0400

My modem DOESN'T say configured...as a matter of fact, it says NOT
configured ;)

*shuffle shuffle* Checking...

----------
> From: Don Swett <dswett@ilnk.com>
> To: ntisp@emerald.iea.com
> Subject: Re: Modem Hangup
> Date: Monday, May 26, 1997 7:17 PM
>
> Telnet into the portmaster. at the prompt type "attach s0". then type
> "ati1i2i3i4i5i6i7".
>
> This string should give you all the info your looking for.
>
> Depending on your brand of modem, you may get errors on some returns.
>
> If you do, just drop of the i? for the ones that you get errors on.
>
> ati3 thru ati5 will probably give you what your looking for but try them
> all either collectively or individually. Hope you got a book with those
> modems.
>
> Make sure you set the modem type in the portmaster.
>
> if you type "show s0" the modem should say "configured".
>
> Don Swett
> dswett@ilnk.com
> Interlink America
> http://www.ilnk.com
> Techsupport@ilnk.com
> Postmaster@ilnk.com
> webmaster@ilnk.com
>
>
>
> ----------
> > From: Jared Groves <jgroves@de-inc.com>
> > To: ntisp@emerald.iea.com
> > Subject: Re: Modem Hangup
> > Date: Monday, May 26, 1997 6:51 PM
> >
> > How can I check the NVRAM from the Port Master? Do I have to
disconnect
> > the modem etc and hook it up to a terminal, or can I do it from the
> > Terminal Server? Thanks :)
> >
> >
> >
> > ----------
> > > From: Kent Runyan <admin@konnections.com>
> > > To: ntisp@emerald.iea.com
> > > Subject: Re: Modem Hangup
> > > Date: Monday, May 26, 1997 4:17 PM
> > >
> > > What modems are you using? If they are USR Sportsters, you need to
> make
> > > sure they have been initialized properly. Check the NVRAM in the two
> > that
> > > answer and compare the settings to the rest of them.
> > >
> > >
> > >
> > > Kent Runyan, Operations Manager
> > > Konnections, Inc.
> > > 2650 Washington Blvd. Ste 208
> > > Ogden, UT 84401
> > > 801-621-8511
> > > http://www.konnections.com
> > >
> > > ----------
> > > > From: Jared Groves <jgroves@de-inc.com>
> > > > To: ntisp@emerald.iea.com
> > > > Subject: Modem Hangup
> > > > Date: Monday, May 26, 1997 11:15 AM
> > > >
> > > > I am really stuck!!!! I just converted my whole system from a lame
> > > > multiport cyclades board over to a livingston pm2e....I had run
some
> > > trials
> > > > before I switched all of my lines over....however...now that I've
> done
> > > the
> > > > switch...only 2 modems will answer. Number 1 and Number 3....all
of
> > the
> > > > rest will pick up and hangup immeaditly...without sending any kind
of
> > > > handshake....ANY help at all toward this would be appreciated...I
am
> in
> > a
> > > > bind and none of my users can get online!
> > > >
> > > >
> > > >
> > > >
> > >
> >
>
----------------------------------------------------------------------------

>
> >
> > >
> > > > ----------------------
> > > > Jared Groves
> jgroves@de-inc.com
> > > > System Administrator
> > > > Digital Entropy
> > > http://www.de-inc.com
> > > >
> > > >
> > > > ----------------------------------------------------------
> > > > NTISP Mailing List listserver@emerald.iea.com
> > > >
> > >
> > > ----------------------------------------------------------
> > > NTISP Mailing List listserver@emerald.iea.com
> >
> > ----------------------------------------------------------
> > NTISP Mailing List listserver@emerald.iea.com
>
> ----------------------------------------------------------
> NTISP Mailing List listserver@emerald.iea.com