Re: Emerald Online status

Will LaSala ( will@greennet.net )
Thu, 27 Feb 1997 16:09:00 -0500

There is a bug with the kernel 1.5.1 you should run kernel 1.5.1d at least.

That will more then likely fix the problem.

----------
> From: Mauricio Marquez <mmarquez@mail.eic.com.mx>
> To: emerald@emerald.iea.com
> Subject: Re: Emerald Online status
> Date: Thursday, February 27, 1997 3:51 PM
>
> At 10:20 AM 02/27/97 -0800, you wrote:
> >Mauricio Marquez wrote:
> >>
> >> I'm using radiusnt 6.0 and Emerald 2.0.75 with a Cisco 2511 and a
Computone
> >> PowerRack.
> >>
> >> The authentication is working quiet well. The problem I'm having is
when I
> >> use Emerald's Online Tab:
> >>
> >> 1. Logs on the Cisco are displayed, but not the username in the port
or the
> >> ip address of the port (I have configured -and saved- each port's ip
address
> >> in the administrator).
> >> 2. Logs on the PowerRack are not displayed at all. I can't see what
ports
> >> are being currently used.
> >
> >You need to run RadiusNT in -x15 debug mode and see what errors
> >(if any) are being sent. Also check your logfile. Until I can see
> >the accounting debug, I don't know what advice to give. :(
>
> Ok, here's an attachment of what radius shows in debug mode when someone
> connects to the PowerRack (powerrack.txt). The radius logfile didn't show
a
> thing aside of what it had before that call. I also noticed that when
> disconnecting, radius didn't show a thing in debug mode.
>
> >--
> >Dale E. Reed Jr. (daler@iea.com)
>
> Thanks,
>
> Mauricio
>
> Enlace Internacional de Comunicaciones
> Internet Services and Consulting
> Phone: 528.346.4667 FAX: 528.345.6987
> http://www.eic.com.mx e-mail:mmarquez@mail.eic.com.mx
>