Re: [NTISP] opening case of Max 4004

Terry Bomersbach ( terryb@the-cia.net )
Fri, 13 Oct 2000 15:04:38 -0500

After you have the screws out at the top front end there is a recess that you
can use a flat screwdriver to pry the slotcards from the riser slot on the
chassis, it's about 1/2" that you'll need to pry it back before it will come
loose.

Josh Hillman wrote:

> If anyone has opened up the case of a Max 4000 series NAS, what was the
> trick to getting it off? I already removed the 3 small screws on both
> sides, as well as the 2 longer screws in the sides of the plastic front
> cover. I can't get anything to budge... This is a Max 4004 from mid-1996
> and I need to replace two dead fans in it.
>
> Thanks for any info,
> Josh
>
> For more information about this list (including removal) go to:
> http://www.iea-software.com/support/maillists/liststart

For more information about this list (including removal) go to:
http://www.iea-software.com/support/maillists/liststart