and if i want only Start and Stop Packets then what will i have to do?
- sci
----- Original Message -----
From: "Ronnie Franklin" <ronnie@itexas.net>
To: <radiusnt@iea-software.com>
Sent: Thursday, September 28, 2000 2:37 PM
Subject: Re: [RadiusNT] URGENT: AcctStatusType is not setting to 2 when user
disconnects.
> If you are running a Cisco, 3 is an update packet with contains the IP
address and other info.
>
> >
> >From: "sci" <sci.news@eudoramail.com>
> >Date: Thu, 28 Sep 2000 12:56:57 +0500
> >To: "Radius NT List" <radiusnt@iea-software.com>
> >Subject: [RadiusNT] URGENT: AcctStatusType is not setting to 2 when user
disconnects.
> >
> >Hi,
> >
> >i have RAD-NT 2.5.175 with NAS of CISCO AS5300
> >DB on SQL6.5 SP5 on NT40 SP6
> >
> >i'm having a the following problems:
> >
> >1. i'm getting AcctStatusType = 1 and 3 when the Start Packet in
received.
> >what does 3 mean?
> >sometimes i get 1 and sometimes i get 3.... so i have to consider 3 as
start
> >too.
> >
> >2. when my users get disconnected, their AcctStatusType is left 1 or 3 in
DB
> >(ServerPorts/CallsOnline), mean they have been disconnected form AS, but
are
> >still "hanging" in the DB as online. Now when the same user try again to
> >login. he just can't.
> >
> >what could be the causes?
> >1. Stop packet didnt received?
> >2. if Stop Packet Received then the AcctStatusType was not 2, it could be
1
> >or 3?
> >3. RAD was unable to update the status type in the DB?
> >4. NAS is not configured properly for RADIUS
> >
> >any ideas?
> >
> >
> >+ how do i manage the CLI option?
> >can i get connecting user's CLI at any stage of authentication and write
my
> >custom SPs or add some code in existing SP to verify it. could it be done
in
> >RAD 3.0? or 2.5?
> >
> >PLEASE HELP
> >
> >
> >TIA
> >
> >- sci
> >
> >
> >For more information about this list (including removal) go to:
> ><a
href="http://www.iea-software.com/support/maillists/liststart">http://www.ie
a-software.com/support/maillists/liststart</a>
> >
>
>
> For more information about this list (including removal) go to:
> http://www.iea-software.com/support/maillists/liststart
>
For more information about this list (including removal) go to:
http://www.iea-software.com/support/maillists/liststart