Josh
----- Original Message -----
From: Mike Kovacich <sysadmin@inter-pc.com>
To: <radiusnt@iea-software.com>
Sent: Wednesday, March 29, 2000 11:25 AM
Subject: Re: [RadiusNT] Ascend Max3000 and Radius Accounting
> RadiusNT 3 authenticates but gives error when sending stop records. I will
> clarify the symptoms:
> when a new debug window is open, It now sends the start record and does
put the
> call in the calls table, but when the connection closes and sends a stop
> account record this is the Dr. Watson application error:
> The instruction at "0x77f6754b" referenced memory at "0x00000013". The
memory
> could not be "read".
>
> The debug window must be closed and opened again otherwise no accounting
is
> done (start or stop)
>
> This is the debub window, the last line is it, then it displays the Dr.
Watson
> error.
> radrecv: Request from host cc32ef64 (MAXWarp) code=4, id=247, length=223
> User-Name = "atest"
> NAS-Identifier = 204.50.239.100
> NAS-Port = 20117
> NAS-Port-Type = 0
> Class = "IEAS1\0038062\00211"
> Acct-Status-Type = 2
> Acct-Delay-Time = 0
> Acct-Session-Id = "323011308"
> Acct-Authentic = 1
> Acct-Session-Time = 287
> Acct-Input-Octets = 3376
> Acct-Output-Octets = 1780
> Acct-Input-Packets = 38
> Acct-Output-Packets = 14
> Ascend-Terminate-Cause = 45
> Ascend-Connect-Progress = 60
>
> Any assistance will be appreciated.
>
> --
> Mike Kovacich
>
>
> For more information about this list (including removal) go to:
> http://www.iea-software.com/support/maillists/liststart
>
For more information about this list (including removal) go to:
http://www.iea-software.com/support/maillists/liststart