Re: [RadiusNT] Radius problems..

superintendent ( (no email) )
Sun, 13 Feb 2000 08:45:52 +1100

Did you allocate a permanent IP no to the client.
rgds

talon wrote:

> I am having problems with isdn accounts that have a dynamic ip assigned to them. Sometimes when they connect they get an ip of 0.0.0.0
> How do I correct this? it happens at random.. here are 2 sepereate instances that i captured :
>
> Resp Time: 101 Auth: 0/0 -> 0 Acct: 5
> radrecv: Request from host d8251b05 code
> User-Name = "nab99"
> NAS-Identifier = 216.37.27.5
> NAS-Port = 10118
> NAS-Port-Type = Sync
> Acct-Status-Type = Start
> Acct-Delay-Time = 3756
> Acct-Session-Id = "301636870"
> Acct-Authentic = RADIUS
> Ascend-Multilink-ID = 14
> Ascend-Num-In-Multilink = 2
> Acct-Link-Count = 71
> Acct-Multi-Session-ID = "0000000e"
> Ascend-Modem-PortNo = 13
> Ascend-Modem-SlotNo = 9
> Caller-Id = "3178189476"
> NAS-Port-DNIS = "1313"
> Framed-Protocol = 262
> Framed-Address = 0.0.0.0 <------------ Bad IP #1
>
> Resp Time: 50 Auth: 0/0 -> 0 Acct: 6
> radrecv: Request from host d8251b04 code
> User-Name = "pcc"
> NAS-Identifier = 216.37.27.4
> NAS-Port = 10104
> NAS-Port-Type = Sync
> Acct-Status-Type = Start
> Acct-Delay-Time = 0
> Acct-Session-Id = "304758527"
> Acct-Authentic = RADIUS
> Ascend-Modem-PortNo = 9
> Ascend-Modem-SlotNo = 9
> Caller-Id = "3174878272"
> NAS-Port-DNIS = "1313"
> Framed-Protocol = 262
> Framed-Address = 0.0.0.0 <--------- bad ip #2
>
> For more information about this list (including removal) go to:
> http://www.iea-software.com/support/maillists/liststart

For more information about this list (including removal) go to:
http://www.iea-software.com/support/maillists/liststart