Doesn't the SNMP Stats check require SNMP Server on the NT Server? We don't
really need that. I set the radntmib.dll in the Data Directory to see if
that helps. I did find out that the Mib.txt was not there.
-----------------------------------------------------------------
Thanks,
TKT
-----------------------------------------------------------------
----- Original Message -----
From: "Josh Hillman" <admin-maillist@talstar.com>
To: <emerald@iea-software.com>
Sent: Tuesday, April 18, 2000 3:26 PM
Subject: Re: [Emerald] Work on SNMP Concurrency Checking
> From: NCKCN <ttuttle@nckcn.com>
> > Okay, pretty much confirmed that SNMP will work only running in debug
> mode.
> > Is this possible? When I run as a service, I get users "hung" and denied
> > service even with SNMP all set up correctly. I stop the service, run as
> > radius -x31 and SNMP Concurrency works perfectly. Any ideas?
>
> Drop the radntmib.dll into your \winnt\system32 directory, then
stop/restart
> RadiusNT and see if it works then. You can do that or specify the "Data
> Directory" and "Acct. Directory" settings in RadiusNT Admin. Unless you
> have that one file in the system path somewhere, it won't work unless it's
> in the "Data Directory" path setting. Also, go into the RadiusNT Admin
> under Advanced. There are two SNMP options there. I know we had to have
> both of our selected to get ours to work correctly (we're using Ascend MAX
> 40xx machines).
>
> Josh
>
> > TIA wrote:
> > >
> > > Are you sure it's AcctSessionID? I see AcctSessionID listing of
131138
> > for
> > > instance. I have no listing of just 1.
> >
> > Sorry, I meant AcctStatusType, not AcctSessionID.
> >
> > > > RadiusNT/Emerald look for entries in the ServerPorts tables with
> > > > AcctSessionID
> > > > of 1 to tell who is on-line. Just set the AcctSessionID from 1 to 0
> to
> > > > clear the port in that table.
> >
> >
> > --
> >
> > Dale E. Reed Jr. Emerald and RadiusNT
> > __________________________________________
> > IEA Software, Inc. www.iea-software.com
> >
> > For more information about this list (including removal) go to:
> > http://www.iea-software.com/support/maillists/liststart
> >
> >
> > For more information about this list (including removal) go to:
> > http://www.iea-software.com/support/maillists/liststart
> >
>
>
> For more information about this list (including removal) go to:
> http://www.iea-software.com/support/maillists/liststart
For more information about this list (including removal) go to:
http://www.iea-software.com/support/maillists/liststart