Re: [Emerald] Work on SNMP Concurrency Checking

TIA ( (no email) )
Sun, 16 Apr 2000 14:02:40 -0500

OK, I ran with debug and have included the whole enchilada ;^) I tried to
run radius -x15, radius -x18, and radius -x31 on a Cisco 2511, and a
3Com/USR Total Control Hub. The radius -x18 gave nothing and would not
authenticate, so I didn't use it on the 3Com/USR. I don't see any SNMP calls
what-so-ever. Maybe I'm missing something. I checked that the Stored
Procedure RadCheckOnlineSNMP is created and that EmeraldApps has permission
(I am connected as sa from this RadiusNT server)

Sorry for the length, but I wanted to be as thorough as possible:

Authenticating on a Cisco 2511:

==================================================
Runing as Radius -x18

Nothing...

==================================================
Running as Radius -x15

radrecv: Request from host cefd384f (e0-rtr2-beloit) code=1, id=197,
length=78
NAS-Identifier = 206.253.56.79
NAS-Port = 8
NAS-Port-Type = Async
User-Name = "testboy"
Challenge-Response =
"\230\031\262\304f\260\317\034\3440\266\257\357\337\341\024\313"
User-Service = Framed-User
Framed-Protocol = PPP
Checking for duplicate logins.
Sending Ack of id 197 to cefd384f (e0-rtr2-beloit)
User-Service = Framed-User
Framed-Protocol = PPP
Session-Timeout = 18000
Idle-Timeout = 900
Class = "IEAS1\00424892\0015"
Resp Time: 672 Auth: 1/0 -> 1 Acct: 1/0/0 -> 1

radrecv: Request from host cefd384f (e0-rtr2-beloit) code=4, id=198,
length=102
NAS-Identifier = 206.253.56.79
NAS-Port = 8
NAS-Port-Type = Async
User-Name = "testboy"
Acct-Status-Type = Start
Class = "IEAS1\00424892\0015"
Acct-Authentic = RADIUS
User-Service = Framed-User
Acct-Session-Id = "00003A02"
Framed-Protocol = PPP
Acct-Delay-Time = 0
Sending Accounting Ack of id 198 to cefd384f (e0-rtr2-beloit)
Resp Time: 562 Auth: 1/0 -> 1 Acct: 2/0/0 -> 2

radrecv: Request from host cefd384f (e0-rtr2-beloit) code=4, id=199,
length=138
NAS-Identifier = 206.253.56.79
NAS-Port = 8
NAS-Port-Type = Async
User-Name = "testboy"
Acct-Status-Type = Stop
Class = "IEAS1\00424892\0015"
Acct-Authentic = RADIUS
User-Service = Framed-User
Acct-Session-Id = "00003A02"
Framed-Protocol = PPP
Framed-Address = 209.42.65.68
Acct-Input-Octets = 129
Acct-Output-Octets = 137
Acct-Input-Packets = 7
Acct-Output-Packets = 7
Acct-Session-Time = 21
Acct-Delay-Time = 0
Sending Accounting Ack of id 199 to cefd384f (e0-rtr2-beloit)
Resp Time: 766 Auth: 1/0 -> 1 Acct: 3/0/0 -> 3

==================================================
Running as Radius -x31

radrecv: Request from host cefd384f (e0-rtr2-beloit) code=1, id=188,
length=78
NAS-Identifier = 206.253.56.79
NAS-Port = 8
NAS-Port-Type = Async
User-Name = "testboy"
Challenge-Response =
"\225*\022\334\204\3654DF\256\376.\312\275\354\011\325"
User-Service = Framed-User
Framed-Protocol = PPP
Checking for duplicate logins.
Sending Ack of id 188 to cefd384f (e0-rtr2-beloit)
User-Service = Framed-User
Framed-Protocol = PPP
Session-Timeout = 18000
Idle-Timeout = 900
Class = "IEAS1\00424892\0015"
Resp Time: 672 Auth: 1/0 -> 1 Acct: 0/0/0 -> 0

radrecv: Request from host cefd384f (e0-rtr2-beloit) code=4, id=189,
length=102
NAS-Identifier = 206.253.56.79
NAS-Port = 8
NAS-Port-Type = Async
User-Name = "testboy"
Acct-Status-Type = Start
Class = "IEAS1\00424892\0015"
Acct-Authentic = RADIUS
User-Service = Framed-User
Acct-Session-Id = "00003A00"
Framed-Protocol = PPP
Acct-Delay-Time = 0
Sending Accounting Ack of id 189 to cefd384f (e0-rtr2-beloit)
Resp Time: 531 Auth: 1/0 -> 1 Acct: 1/0/0 -> 1

radrecv: Request from host cefd384f (e0-rtr2-beloit) code=4, id=190,
length=138
NAS-Identifier = 206.253.56.79
NAS-Port = 8
NAS-Port-Type = Async
User-Name = "testboy"
Acct-Status-Type = Stop
Class = "IEAS1\00424892\0015"
Acct-Authentic = RADIUS
User-Service = Framed-User
Acct-Session-Id = "00003A00"
Framed-Protocol = PPP
Framed-Address = 209.42.65.72
Acct-Input-Octets = 279
Acct-Output-Octets = 309
Acct-Input-Packets = 18
Acct-Output-Packets = 19
Acct-Session-Time = 122
Acct-Delay-Time = 0
Sending Accounting Ack of id 190 to cefd384f (e0-rtr2-beloit)
Resp Time: 203 Auth: 1/0 -> 1 Acct: 2/0/0 -> 2

+++++++++++++++++++++++++++++++++++++++++++++++++++

Authenticating on a 3Com/USR Total Control Hub:

==================================================
Runing as Radius -x15

radrecv: Request from host d12a56fc (tcm-lincoln) code=1, id=18, length=178
User-Name = "testboy"
Challenge-Response = "\004L\025\266\327
P\273\276\003\204\250}\313\331n'"
NAS-Identifier = 209.42.86.252
NAS-Port = 8
Acct-Session-Id = "458785"
Interface_Index = 1264
Received unknown attribute 39049, vendor 429
User-Service = Framed-User
Framed-Protocol = PPP
Chasis-Call-Slot = 1
Chasis-Call-Span = 1
Chasis-Call-Channel = 8
Connect-Speed = 1
Caller-Id = ""
NAS-Port-DNIS = "5390"
NAS-Port-Type = Async
Checking for duplicate logins.
Sending Ack of id 18 to d12a56fc (tcm-lincoln)
User-Service = Framed-User
Framed-Protocol = PPP
Session-Timeout = 18000
Idle-Timeout = 900
Class = "IEAS1\00424892\00211"
Resp Time: 969 Auth: 1/0 -> 1 Acct: 0/0/0 -> 0

radrecv: Request from host d12a56fc (tcm-lincoln) code=4, id=213, length=295
Class = "IEAS1\00424892\00211"
User-Name = "testboy"
NAS-Identifier = 209.42.86.252
Acct-Status-Type = Start
Acct-Session-Id = "458785"
Acct-Delay-Time = 0
Acct-Authentic = RADIUS
User-Service = Framed-User
NAS-Port-Type = Async
NAS-Port = 8
Received unknown attribute 38978, vendor 429
Interface_Index = 1264
Chasis-Call-Slot = 1
Chasis-Call-Span = 1
Chasis-Call-Channel = 8
Unauthenticated_Time = 7
Caller-Id = ""
NAS-Port-DNIS = "5390"
Modulation_Type = 34
Simplified_MNP_Levels = 13
Simplified_V42bis_Usage = 2
Connect-Speed = 32
Framed-Protocol = PPP
Framed-Address = 206.253.60.78
Received unknown attribute 38998, vendor 429
Received unknown attribute 39000, vendor 429
Sending Accounting Ack of id 213 to d12a56fc (tcm-lincoln)
Resp Time: 922 Auth: 1/0 -> 1 Acct: 1/0/0 -> 1

radrecv: Request from host d12a56fc (tcm-lincoln) code=4, id=216, length=359
Class = "IEAS1\00424892\00211"
User-Name = "testboy"
NAS-Identifier = 209.42.86.252
Acct-Status-Type = Stop
Acct-Session-Id = "458785"
Acct-Delay-Time = 0
Acct-Authentic = RADIUS
User-Service = Framed-User
NAS-Port-Type = Async
NAS-Port = 8
Received unknown attribute 38978, vendor 429
Interface_Index = 1264
Chasis-Call-Slot = 1
Chasis-Call-Span = 1
Chasis-Call-Channel = 8
Unauthenticated_Time = 7
Caller-Id = ""
NAS-Port-DNIS = "5390"
Modulation_Type = 34
Simplified_MNP_Levels = 13
Simplified_V42bis_Usage = 2
Connect-Speed = 32
Framed-Protocol = PPP
Framed-Address = 206.253.60.78
Received unknown attribute 38998, vendor 429
Received unknown attribute 39000, vendor 429
Received unknown attribute 39001, vendor 429
Acct-Session-Time = 20
Acct-Terminate-Cause = User-Request
Received unknown attribute 39051, vendor 429
Acct-Input-Octets = 283
Acct-Output-Octets = 407
Acct-Input-Packets = 12
Acct-Output-Packets = 16
Sending Accounting Ack of id 216 to d12a56fc (tcm-lincoln)
Resp Time: 1250 Auth: 1/0 -> 1 Acct: 4/0/0 -> 4

==================================================
Running as Radius -x31

radrecv: Request from host d12a56fc (tcm-lincoln) code=1, id=20, length=178
User-Name = "testboy"
Challenge-Response = "\004\336"
NAS-Identifier = 209.42.86.252
NAS-Port = 3
Acct-Session-Id = "131145"
Interface_Index = 1259
Received unknown attribute 39049, vendor 429
User-Service = Framed-User
Framed-Protocol = PPP
Chasis-Call-Slot = 1
Chasis-Call-Span = 1
Chasis-Call-Channel = 3
Connect-Speed = 1
Caller-Id = ""
NAS-Port-DNIS = "5390"
NAS-Port-Type = Async
Checking for duplicate logins.
Sending Ack of id 20 to d12a56fc (tcm-lincoln)
User-Service = Framed-User
Framed-Protocol = PPP
Session-Timeout = 18000
Idle-Timeout = 900
Class = "IEAS1\00424892\00211"
Resp Time: 969 Auth: 1/0 -> 1 Acct: 0/0/0 -> 0

radrecv: Request from host d12a56fc (tcm-lincoln) code=4, id=221, length=295
Class = "IEAS1\00424892\00211"
User-Name = "testboy"
NAS-Identifier = 209.42.86.252
Acct-Status-Type = Start
Acct-Session-Id = "131145"
Acct-Delay-Time = 0
Acct-Authentic = RADIUS
User-Service = Framed-User
NAS-Port-Type = Async
NAS-Port = 3
Received unknown attribute 38978, vendor 429
Interface_Index = 1259
Chasis-Call-Slot = 1
Chasis-Call-Span = 1
Chasis-Call-Channel = 3
Unauthenticated_Time = 7
Caller-Id = ""
NAS-Port-DNIS = "5390"
Modulation_Type = 34
Simplified_MNP_Levels = 13
Simplified_V42bis_Usage = 2
Connect-Speed = 32
Framed-Protocol = PPP
Framed-Address = 206.253.60.73
Received unknown attribute 38998, vendor 429
Received unknown attribute 39000, vendor 429
Sending Accounting Ack of id 221 to d12a56fc (tcm-lincoln)
Resp Time: 969 Auth: 1/0 -> 1 Acct: 1/0/0 -> 1

radrecv: Request from host d12a56fc (tcm-lincoln) code=4, id=222, length=359
Class = "IEAS1\00424892\00211"
User-Name = "testboy"
NAS-Identifier = 209.42.86.252
Acct-Status-Type = Stop
Acct-Session-Id = "131145"
Acct-Delay-Time = 0
Acct-Authentic = RADIUS
User-Service = Framed-User
NAS-Port-Type = Async
NAS-Port = 3
Received unknown attribute 38978, vendor 429
Interface_Index = 1259
Chasis-Call-Slot = 1
Chasis-Call-Span = 1
Chasis-Call-Channel = 3
Unauthenticated_Time = 7
Caller-Id = ""
NAS-Port-DNIS = "5390"
Modulation_Type = 34
Simplified_MNP_Levels = 13
Simplified_V42bis_Usage = 2
Connect-Speed = 32
Framed-Protocol = PPP
Framed-Address = 206.253.60.73
Received unknown attribute 38998, vendor 429
Received unknown attribute 39000, vendor 429
Received unknown attribute 39001, vendor 429
Acct-Session-Time = 14
Acct-Terminate-Cause = User-Request
Received unknown attribute 39051, vendor 429
Acct-Input-Octets = 270
Acct-Output-Octets = 395
Acct-Input-Packets = 12
Acct-Output-Packets = 15
Sending Accounting Ack of id 222 to d12a56fc (tcm-lincoln)
Resp Time: 1297 Auth: 1/0 -> 1 Acct: 2/0/0 -> 2

-------------------------------
Any ideas? Does SNMP Concurrency Check work on any NAS?

Thanks,
TKT

----- Original Message -----
From: "Dale E. Reed Jr." <daler@iea-software.com>
To: <emerald@iea-software.com>
Sent: Saturday, April 15, 2000 2:55 PM
Subject: Re: [Emerald] Work on SNMP Concurrency Checking

> TIA wrote:
> >
> > I am wondering that if SNMP Concurrency works an it checks the Port
> > correctly where the user is supposed to be connected and doesn't find
the
> > match, does it then clear that user from the Calls table or simply add
it?
>
> No. It just ignored the entry.
>
> If you run RadiusNT in -x18 debug mode, it shows a decent debug and
> will include the SNMP calls and what the NAS returns. You can run
> in -x31 to see the normal -x15 debug mode with SNMP calls as well.
>
>
> --
>
> Dale E. Reed Jr. Emerald and RadiusNT
> __________________________________________
> IEA Software, Inc. www.iea-software.com
>
> For more information about this list (including removal) go to:
> http://www.iea-software.com/support/maillists/liststart

For more information about this list (including removal) go to:
http://www.iea-software.com/support/maillists/liststart