Subject: RE: [RadiusNT] Radius admin password recovery Date: Thu, 12 Jun 2003 16:06:11 -0400 Message-ID: <A10FF57292DB5441876BF32B81663149677B@exchange.inhouse.amaxx.net> From: "Hall, Eric M." <ehall@amaxx.com>
Dale
As always you saved the day!!! Thank you
-----Original Message-----
From: Dale E. Reed Jr. [mailto:daler@iea-software.com]
Sent: Thursday, June 12, 2003 3:51 PM
To: radiusnt@iea-software.com
Subject: RE: [RadiusNT] Radius admin password recovery
> I lost my admin password for Radius. Does anyone
> know how to recover it ?
This is from the Emerald 4 Admin guide:
The password configured for the Web Configuration Server is shared among
all the Emerald Management Suite Configuration Server Administrators
(Emerald Web Configuration Server, RadiusNT Administrator, EmerAuth
Administrator, etc.), meaning that all Administrators running on the
same machine will use the same password once it has been established.
Because it is locally configured, the password is machine-specific. If
the password is forgotten, it can be located by following the
instructions below. If the WCPassword entry is cleared as described
below, you will be prompted to provide a new password upon the next Web
Configuration Server start-up. On Windows machines: Use the Registry
Editor to look up the value under the Registry value for WCPassword
under HKEY_LOCAL_MACHINE\Software\IEA\Common. You can clear the value
within the Registry Editor, but the web server must be stopped and
restarted in order for the changes to take affect. On non-windows
platforms the value can be found within the /usr/local/iea/common.ini
file. The existing password is cleared by removing the "WCPassword = "
line.
------------
This is a user supported list. If you require assistance from IEA
Software's Support Engineers, please check out our Support resources at
http://www.iea-software.com/support.
For more information about this list (including removal) go to:
http://www.iea-software.com/support/maillists/liststart