From: "Jim Sheldon" <email@example.com> Subject: RE: [Emerald] Radius 2.5 Connect-Info Question Date: Wed, 6 Nov 2002 17:05:48 -0600 Message-ID: <000501c285e9$0b2937c0$c85f1fd0@Jim>
I finally got this working after much head scratching. You have to alias
the attribute in Emerald admin. Specifically, go to admin, radius,
vendors, usr, connect-speed and set the alias vendor to Radius Standard
and the alias attribute to connect-info. I also did the opposite and
aliased the standard connect-info to the USR connect-speed. I don't know
which one made it work. but it does work and is much easier to read than
having a chart taped to the monitor.
[mailto:firstname.lastname@example.org] On Behalf Of Network Operations Sent: Wednesday, November 06, 2002 3:25 PM To: email@example.com Subject: [Emerald] Radius 2.5 Connect-Info Question
I have never gotten Connect-Info to work properly and
cannot find anything that helps in the archives.
When in debuging view I see the response from my modem pool (Total
control HiperArc) listed as Connect-Info = 53333 for
example. Yet in the SQL insert statement the value 34 is
written to the serverports table.
Naturally in the Online view, the 33 is displayed.
So, how do I get the 53333 translation of 34 written to the database?
The Connect-Info Attribute exists:
and the attribute values exist, I believe I had to add these
to get as far as I am now.
This is a user supported list. If you require assistance from IEA
Software's Support Engineers, please check out our Support resources at
For more information about this list (including removal) go to: