At 08:44 AM 5/20/99 -0700, you wrote:
>I have two Netserver 16's and they do the same thing. I have had the same
>problem with Radius NT as I have with 3COM's own Radius. I think it is
>something to do with the Netserver code.
>
>Danny Sinang wrote:
>
>> Hello.
>>
>> I just bought a used USR Netserver 16 with firmware version 3.x .
>>
>> It answers all calls faithfully, but everytime it authenticates against
>> RadiusNT 1.16.60 and sends accounting packets to it, RadiusNT crashes.
>>
>> So I decided to upgrade the firmware to version 4.1.7 and see what happens.
>>
>> The problem is, after a failed dialup attempt to any port in the Netserver,
>> it won't allow any more calls. I set the Netserver to debug mode (show
>> events) and it says something about "PPP : UNKNOWN compression" .
>>
>> I applied the 2 service releases that were reported to fix this failure to
>> answer calls, but it doesn't seem to work.
>> The latest service release is 4.1.77 dated December 3, 1998.
>>
>> Should I have set dip switch # 4 down to erase the flash configuration
>> before I applied the service releases ?
>>
>> What could be the solution ?
>>
>> Does anybody here have RadiusNT 1.16.49 ? I heard it wasn't as broken as
>> 1.16.60 .
>>
>> Danny Sinang
>> President
>> Uplink Technologies, Inc.
>> www.uplink.com.ph
>
>