Try just this.
set chassis slot "#" ports 24
Carolyn Smith wrote:
> It's telling me that it cannot change a card type of a dynamic entry
>
> ----- Original Message -----
> From: Geoffrey L. Scully
> To: ntisp@iea-software.comSent: Wednesday, February 24, 1999
> 2:03 PMSubject: Re: [NTISP] Total control DSP modem problem
> Let me know if this does not work and I will try and see
> why not.
>
> Carolyn Smith wrote:
>
> > Thanks abunch.Carolyn
> >
> > ----- Original Message -----
> > From: Geoffrey L. Scully
> > To: ntisp@iea-software.comSent: Wednesday,
> > February 24, 1999 1:49 PMSubject: Re: [NTISP]
> > Total control DSP modem problem
> > Just Telnet in.
> >
> > Carolyn Smith wrote:
> >
> > > Were do I enter this command at. In the TCM
> > > or do I use the console method. Carolyn
> > >
> > > ----- Original Message -----
> > > From: Geoffrey L. Scully
> > > To: ntisp@iea-software.comSent:
> > > Wednesday, February 24, 1999 1:35
> > > PMSubject: Re: [NTISP] Total control
> > > DSP modem problem
> > > set chassis slot "#" type hdm_24
> > > owner yes ports 24
> > >
> > > This makes sure the particular slot
> > > is set up for Hiper DSP 24 ports
> > >
> > > Carolyn Smith wrote:
> > >
> > > > Hello, I have one USR Total Control
> > > > unit with 4 Hiper dsp cards(nodem
> > > > cards) installed. The fourth card
> > > > was the last installed and it has
> > > > given us problems ever since. I
> > > > had the card replaced but the
> > > > problem is still somewhat there.
> > > > The problem is that one of the
> > > > modems (#24) has not been used
> > > > since we installed the card. It is
> > > > also returning the error of "pk bus
> > > > generic error" in the TMC as the
> > > > reason for call failure. I thought
> > > > it might be because I use
> > > > Channelized t1's but all the other
> > > > cards modems never return this
> > > > error. I also checked in my Hiper
> > > > Arc Router mgr. software and found
> > > > that the modem card is only
> > > > returning 23 modems as being up.
> > > > Does anyone out there use this same
> > > > equipment and have any ideal what
> > > > could be causing this problem?
> > > > ThanksC. Smith
> > >
--------------C5CFD134F40507C4C06937FD
Content-Type: text/html; charset=us-ascii
Content-Transfer-Encoding: 7bit
<!doctype html public "-//w3c//dtd html 4.0 transitional//en">
Carolyn Smith wrote:
It's telling me that it cannotchange a card type of a dynamic entry----- Original Message -----Let me know if this does not work and I will try and see why not.From: GeoffreyL. ScullyTo: ntisp@iea-software.comSent:Wednesday, February 24, 1999 2:03 PMSubject: Re: [NTISP] Total controlDSP modem problemCarolyn Smith wrote:
Thanks abunch.Carolyn----- Original Message -----Just Telnet in.From: GeoffreyL. ScullyTo: ntisp@iea-software.comSent:Wednesday, February 24, 1999 1:49 PMSubject: Re: [NTISP] Total controlDSP modem problemCarolyn Smith wrote:
Were do I enter this commandat. In the TCM or do I use the console method. Carolyn----- Original Message -----set chassis slot "#" type hdm_24 owner yes ports 24From: GeoffreyL. ScullyTo: ntisp@iea-software.comSent:Wednesday, February 24, 1999 1:35 PMSubject: Re: [NTISP] Total controlDSP modem problemThis makes sure the particular slot is set up for Hiper DSP 24 ports
Carolyn Smith wrote:
Hello, Ihave one USR Total Control unit with 4 Hiper dsp cards(nodem cards) installed.The fourth card was the last installed and it has given usproblems ever since. I had the card replaced but the problem is stillsomewhat there. The problem is that one of the modems (#24) has notbeen used since we installed the card. It is also returning the errorof "pk bus generic error" in the TMC as the reason for call failure. I thought it might be because I use Channelized t1's but all the othercards modems never return this error. I also checkedin my Hiper Arc Router mgr. software and found that the modem card is onlyreturning 23 modems as being up. Does anyone out thereuse this same equipment and have any ideal what could be causing this problem?ThanksC. Smith
--------------C5CFD134F40507C4C06937FD--