------=_NextPart_000_000D_01BE5FFB.607C9540
Content-Type: text/plain;
charset="Windows-1252"
Content-Transfer-Encoding: quoted-printable
Were do I enter this command at. In the TCM or do I use the console =
method.
Carolyn
----- Original Message -----=20
From: Geoffrey L. Scully=20
To: ntisp@iea-software.com=20
Sent: Wednesday, February 24, 1999 1:35 PM
Subject: Re: [NTISP] Total control DSP modem problem
set chassis slot "#" type hdm_24 owner yes ports 24=20
This makes sure the particular slot is set up for Hiper DSP 24 ports=20
Carolyn Smith wrote:=20
Hello, I have one USR Total Control unit with 4 Hiper dsp =
cards(nodem cards) installed. The fourth card was the last installed and =
it has given us problems ever since. I had the card replaced but the =
problem is still somewhat there. The problem is that one of the modems =
(#24) has not been used since we installed the card. It is also =
returning the error of "pk bus generic error" in the TMC as the reason =
for call failure. I thought it might be because I use Channelized t1's =
but all the other cards modems never return this error. I also checked =
in my Hiper Arc Router mgr. software and found that the modem card is =
only returning 23 modems as being up. Does anyone out there use this =
same equipment and have any ideal what could be causing this problem? =
ThanksC. Smith
------=_NextPart_000_000D_01BE5FFB.607C9540
Content-Type: text/html;
charset="Windows-1252"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD W3 HTML//EN">
This makes sure the particular slot is set up for Hiper DSP 24 =ports=20
Carolyn Smith wrote:=20