set chassis slot "#" type hdm_24 owner yes ports 24
This makes sure the particular slot is set up for Hiper DSP 24 ports
Carolyn Smith wrote:
> Hello, I have one USR Total Control unit with 4 Hiper dsp cards(nodem
> cards) installed. The fourth card was the last installed and it has
> given us problems ever since. I had the card replaced but the problem
> is still somewhat there. The problem is that one of the modems (#24)
> has not been used since we installed the card. It is also returning
> the error of "pk bus generic error" in the TMC as the reason for call
> failure. I thought it might be because I use Channelized t1's but all
> the other cards modems never return this error. I also checked in my
> Hiper Arc Router mgr. software and found that the modem card is only
> returning 23 modems as being up. Does anyone out there use this same
> equipment and have any ideal what could be causing this
> problem? ThanksC. Smith
--------------68951F23EFBE7823F4F7BD89
Content-Type: text/html; charset=us-ascii
Content-Transfer-Encoding: 7bit
<!doctype html public "-//w3c//dtd html 4.0 transitional//en">
This makes sure the particular slot is set up for Hiper DSP 24 ports
Carolyn Smith wrote:
Hello, Ihave one USR Total Control unit with 4 Hiper dsp cards(nodem cards) installed. Thefourth card was the last installed and it has given us problems ever since. I had the card replaced but the problem is still somewhat there. The problem is that one of the modems (#24) has not been used since weinstalled the card. It is also returning the error of "pk bus genericerror" in the TMC as the reason for call failure. I thought it mightbe because I use Channelized t1's but all the other cards modems neverreturn this error. I also checked in my HiperArc Router mgr. software and found that the modem card is only returning23 modems as being up. Does anyone out thereuse this same equipment and have any ideal what could be causing this problem? ThanksC.Smith
--------------68951F23EFBE7823F4F7BD89--