Re: [NTISP] switching from SCSI to IDE

David Payer ( (no email) )
Mon, 21 Dec 1998 19:38:46 -0600

>My experience is to change add the IDE adapter in Control panel's SCSI
>applet, run both drives, copy the data, remove the SCSI device driver,
>remove the SCSI drive and reboot. Of course simply restoring a tape is the
>better option..........

Dan, you had it right on this. I had installed it on the SCSI and there was
no SCSI (IDE) device listed. Therefore it couldn't use it. I added it and
then did the copy again. Unfortunately, this copy program works from a DOS
prompt from a booted diskette. It is up and running.

You have my appreciation.

David Payer
OMNI Internet

For more information about this list, including removal,
see this url: