Lawrence Abrams
----- Original Message -----
From: <dsmith@kleintech.com>
To: <radiusnt@iea-software.com>
Sent: Wednesday, October 27, 1999 6:34 PM
Subject: Re: [RadiusNT] RadiusNT and the trim names feature
>
>
> Why don't you strip the domain at the Proxy radius??? In the
RadRoamServers
> table make the StripDomain column a non-zero value.
>
>
>
>
>
>
>
>
> "Lawrence Abrams" <larry@remoteit.com> on 10/27/99 05:30:02 PM
>
> Please respond to radiusnt@iea-software.com
>
>
>
>
>
>
>
>
> To: radiusnt@iea-software.com
>
> cc: (bcc: David L Smith/Klein)
>
>
>
> Subject: Re: [RadiusNT] RadiusNT and the trim names feature
>
>
>
>
>
>
>
>
>
> I changed the entry in the registry and gave it a value of 3. It still
does
> not seem to trim the @domain form the authentication request. I also
> upgraded the version to build 195 but still no luck. I dont believe I
have
> to put any checks in the proxy check boxes in the RadiusNT admin because
> when I change my usersname to user@domain, instead of user, it
authenticates
> fine. So the only problem here is that it is not trimming the @domain.
> Anyone able to help?
>
>
> Lawrence Abrams
>
> ----- Original Message -----
> From: Graeme Slogrove <Graeme@na.co.za>
> To: <radiusnt@iea-software.com>
> Sent: Wednesday, October 27, 1999 9:13 AM
> Subject: RE: [RadiusNT] RadiusNT and the trim names feature
>
>
> > It's a registry key for Radius called TrimName
> >
> > Just edit it in regedt32
> >
> >
> > Regards,
> > Graeme
> >
> > ---
> > Graeme Slogrove, BSc (Eng) Elec (Wits)
> > Director, Systems Development & Value Added Services
> > NetActive Internet
> > Tel: 011-719-0333 Fax: 011-719-0444
> > Support: 011-719-0300
> >
> >
> >
> > -----Original Message-----
> > From: Lawrence Abrams [mailto:larry@remoteit.com]
> > Sent: 27 October 1999 02:52
> > To: radiusnt@iea-software.com
> > Subject: Re: [RadiusNT] RadiusNT and the trim names feature
> >
> >
> > Im confused as to what your telling me to do. I dont know sql very
> well,and
> > not sure if you are referring to that.
> >
> > Thanks
> >
> >
> > ----- Original Message -----
> > From: Graeme Slogrove <Graeme@na.co.za>
> > To: <radiusnt@iea-software.com>
> > Sent: Wednesday, October 27, 1999 1:46 AM
> > Subject: RE: [RadiusNT] RadiusNT and the trim names feature
> >
> >
> > > >From Dale:
> > >
> > > Trimname in 2.5.194 and higher has two bits/flags:
> > >
> > > 1: Trim spaces off front/end.
> > >
> > > 2: Trime Domains off front/end.
> > >
> > >
> > > To enable both, you use a value of 3. Option 2 also allows you to
> > > set TrimPre and TrimPost REG_SZ values, which define the pre/post
> > > delimiters. By Default, they are /\% for pre and @ for post.
> > >
> > > Regards,
> > > Graeme
> > >
> > > ---
> > > Graeme Slogrove, BSc (Eng) Elec (Wits)
> > > Director, Systems Development & Value Added Services
> > > NetActive Internet
> > > Tel: 011-719-0333 Fax: 011-719-0444
> > > Support: 011-719-0300
> > >
> > >
> > >
> > > -----Original Message-----
> > > From: Lawrence Abrams [mailto:larry@remoteit.com]
> > > Sent: 27 October 1999 01:39
> > > To: radiusnt@iea-software.com
> > > Subject: [RadiusNT] RadiusNT and the trim names feature
> > >
> > >
> > > Maybe I am doing something wrong though. I also do not have any of
the
> > > proxy checkboxes setup in RadiusNT. Are these needed? I seem to be
> able
> > to
> > > authenticate without them.
> > >
> > > Lawrence Abrams
> > > RemoteIT
> > >
> > >
> > > For more information about this list (including removal) go to:
> > > http://www.iea-software.com/support/maillists/liststart
> > >
> > > For more information about this list (including removal) go to:
> > > http://www.iea-software.com/support/maillists/liststart
> >
> >
> > For more information about this list (including removal) go to:
> > http://www.iea-software.com/support/maillists/liststart
> >
> > For more information about this list (including removal) go to:
> > http://www.iea-software.com/support/maillists/liststart
>
>
> For more information about this list (including removal) go to:
> http://www.iea-software.com/support/maillists/liststart
>
>
>
>
> For more information about this list (including removal) go to:
> http://www.iea-software.com/support/maillists/liststart
For more information about this list (including removal) go to:
http://www.iea-software.com/support/maillists/liststart