Re: [RadiusNT] RadiusNT and the trim names feature

Lawrence Abrams ( (no email) )
Wed, 27 Oct 1999 17:30:02 -0400

I changed the entry in the registry and gave it a value of 3. It still does
not seem to trim the @domain form the authentication request. I also
upgraded the version to build 195 but still no luck. I dont believe I have
to put any checks in the proxy check boxes in the RadiusNT admin because
when I change my usersname to user@domain, instead of user, it authenticates
fine. So the only problem here is that it is not trimming the @domain.
Anyone able to help?

Lawrence Abrams

----- Original Message -----
From: Graeme Slogrove <Graeme@na.co.za>
To: <radiusnt@iea-software.com>
Sent: Wednesday, October 27, 1999 9:13 AM
Subject: RE: [RadiusNT] RadiusNT and the trim names feature

> It's a registry key for Radius called TrimName
>
> Just edit it in regedt32
>
>
> Regards,
> Graeme
>
> ---
> Graeme Slogrove, BSc (Eng) Elec (Wits)
> Director, Systems Development & Value Added Services
> NetActive Internet
> Tel: 011-719-0333 Fax: 011-719-0444
> Support: 011-719-0300
>
>
>
> -----Original Message-----
> From: Lawrence Abrams [mailto:larry@remoteit.com]
> Sent: 27 October 1999 02:52
> To: radiusnt@iea-software.com
> Subject: Re: [RadiusNT] RadiusNT and the trim names feature
>
>
> Im confused as to what your telling me to do. I dont know sql very
well,and
> not sure if you are referring to that.
>
> Thanks
>
>
> ----- Original Message -----
> From: Graeme Slogrove <Graeme@na.co.za>
> To: <radiusnt@iea-software.com>
> Sent: Wednesday, October 27, 1999 1:46 AM
> Subject: RE: [RadiusNT] RadiusNT and the trim names feature
>
>
> > >From Dale:
> >
> > Trimname in 2.5.194 and higher has two bits/flags:
> >
> > 1: Trim spaces off front/end.
> >
> > 2: Trime Domains off front/end.
> >
> >
> > To enable both, you use a value of 3. Option 2 also allows you to
> > set TrimPre and TrimPost REG_SZ values, which define the pre/post
> > delimiters. By Default, they are /\% for pre and @ for post.
> >
> > Regards,
> > Graeme
> >
> > ---
> > Graeme Slogrove, BSc (Eng) Elec (Wits)
> > Director, Systems Development & Value Added Services
> > NetActive Internet
> > Tel: 011-719-0333 Fax: 011-719-0444
> > Support: 011-719-0300
> >
> >
> >
> > -----Original Message-----
> > From: Lawrence Abrams [mailto:larry@remoteit.com]
> > Sent: 27 October 1999 01:39
> > To: radiusnt@iea-software.com
> > Subject: [RadiusNT] RadiusNT and the trim names feature
> >
> >
> > Maybe I am doing something wrong though. I also do not have any of the
> > proxy checkboxes setup in RadiusNT. Are these needed? I seem to be
able
> to
> > authenticate without them.
> >
> > Lawrence Abrams
> > RemoteIT
> >
> >
> > For more information about this list (including removal) go to:
> > http://www.iea-software.com/support/maillists/liststart
> >
> > For more information about this list (including removal) go to:
> > http://www.iea-software.com/support/maillists/liststart
>
>
> For more information about this list (including removal) go to:
> http://www.iea-software.com/support/maillists/liststart
>
> For more information about this list (including removal) go to:
> http://www.iea-software.com/support/maillists/liststart

For more information about this list (including removal) go to:
http://www.iea-software.com/support/maillists/liststart