Check "allow malformed" in the RadiusNT admin and restart RadiusNT.
> radrecv: Request from host cfec29fe code=4, id=1, length=97
> Received unknown attribute 1, vendor 0
> Received unknown attribute 4, vendor 0
> Received unknown attribute 40, vendor 0
> Received unknown attribute 44, vendor 0
> Received unknown attribute 41, vendor 0
> Received unknown attribute 45, vendor 0
> Received unknown attribute 6, vendor 0
> Received unknown attribute 15, vendor 0
> Received unknown attribute 16, vendor 0
> Received unknown attribute 14, vendor 0
> Received unknown attribute 61, vendor 0
> Request from 207.236.41.254 - Malformed Packet
>
> Resp Time: 16 Auth: 0/0 -> 0 Acct: 0/0/0 -> 0
>
> Where would I go about trying to find the specs on the attributes I
> need to add ?
The above looks like RadiusNT could no load its dictionary (therefore
all attributed are unknown). Check -x15 for startup errors and make
sure
RadiusNT has access to the RadAttributes table.
--Dale E. Reed Jr. Emerald and RadiusNT__________________________________________IEA Software, Inc. www.iea-software.com
For more information about this list (including removal) go to:http://www.iea-software.com/support/maillists/liststart