My NT machine died
Michael Saunders
Many thanks in advance
----- Original Message -----
From: Dale E. Reed Jr. <daler@iea-software.com>
To: <radiusnt@iea-software.com>
Sent: Saturday, August 28, 1999 2:26 AM
Subject: Re: [RadiusNT] SNMP concurrency checking
> Herman verschooten wrote:
> >
> > Say Dale,
> > We've got a RA8000 from Bay-Nortel, i've seen that there's an entry for
the
> > 5399, but the proble we face is that bay has changed their entry to
> >
> > .1.3.6.1.4.1.15.2.16.1.2.1.3.1.x for asynchrone calls, where x is the
> > port-number
> > .1.3.6.1.4.1.15.2.16.1.2.1.3.9.x for synchronce calls
> > .1.3.6.1.4.1.15.2.16.1.2.1.3.10.x for ta calls
> >
> > but what they sent in the access-request is either
> >
> > a. when radius-port-enconding is set to channel
> >
> > aabcc
> >
> > where aa is the connection type (10 for async, 20 for sync, etc)
> > where b is the PRI
> > where cc is the connection
> >
> > b. when set to device
> >
> > you just get the port-number, eg when you have an async call on port
10,
> > this will be 10. When you get a sync (ISDN) call on port 10, this will
alse
> > be 10. You can never get two simultanous calls with the same
port-number.
> > But how can you do you set this up ?
>
> You need to find what the SNMP OID for them is. For example, do
> they allow a lookup based on the port number (no matter what the
> scheme) on some SNMP tree, or are they always 0-x types SNMP
> requests? It really doesn't matter, as long as you can setup
> a mapping of them. For example, lets say in radius-port-encoding
> mode, they still do the physical port 0-x type SNMP lookups.
> You would just define all three sets of ports (async, sync, ta)
> where the first entry of each would point to the first OID,
> the second entries of each to the second OID, etc (remember I do
> NOT know if that is how they do it or not).
>
> If you want to give me SNMP access to one of them and access
> to your DB, I'd be happy to check it out.
>
>
> --
>
> Dale E. Reed Jr. Emerald and RadiusNT
> __________________________________________
> IEA Software, Inc. www.iea-software.com
>
> For more information about this list (including removal) go to:
> http://www.iea-software.com/support/maillists/liststart
For more information about this list (including removal) go to:
http://www.iea-software.com/support/maillists/liststart