Support Technique wrote:
> we have seen the same behavior on our HiperDSP equipement and we are
> not using mpp. One thing we have noticed, it happens mostly when the
> lines are almost full. (1-5 ports free).
>
> Patrice Boucher
> Responsable des télécommunications
> Les systèmes informatique CONCEPTA inc.
> Support@concepta.com
>
> -----Original Message-----
> From: radiusnt-request@iea-software.com
> [mailto:radiusnt-request@iea-software.com]On Behalf Of Kelly Peterson
> Sent: 16 juillet, 1999 12:21
> To: radiusnt@iea-software.com
> Subject: [RadiusNT] Some of our clients are being assigned 0.0.0.0 IP
> address
>
> The problem doesn't seem to be totally random. That is some clients are
> prone to getting it while most never get it. Our syslog entries look like
> this:
>
> Jul 15 20:27:11 ns19.interbaun.com At 20:29:22, Facility "Auth Facility",
> Level "COMMON":: Port slot:2/mod:4 user ight session connected, call id
> 16974191, protocol: PPP - ip address: 0.0.0.0
> Jul 15 20:27:11 ns19.interbaun.com At 20:29:22, Facility "Auth Facility",
> Level "COMMON":: Port slot:2/mod:4 user ight session disconnected, call id
> 16974191, protocol: PPP - ip address 0.0.0.0
>
> This particular user is running Windows 98 and is using a Winmodem LT.
>
> I don't think that the problem is related to radius, but maybe some of you
> might have seen this before. We're using Total Control racks with
> HiperDSPs running the latest firmware.
>
> Thanks
>
> For more information about this list (including removal) go to:
> http://www.iea-software.com/support/maillists/liststart
>
> For more information about this list (including removal) go to:
> http://www.iea-software.com/support/maillists/liststart
For more information about this list (including removal) go to:
http://www.iea-software.com/support/maillists/liststart