RE: [RadiusNT] Some of our clients are being assigned 0.0.0.0 IP address

Support Technique ( (no email) )
Fri, 16 Jul 1999 12:31:33 -0400

we have seen the same behavior on our HiperDSP equipement and we are
not using mpp. One thing we have noticed, it happens mostly when the
lines are almost full. (1-5 ports free).

Patrice Boucher
Responsable des télécommunications
Les systèmes informatique CONCEPTA inc.
Support@concepta.com

-----Original Message-----
From: radiusnt-request@iea-software.com
[mailto:radiusnt-request@iea-software.com]On Behalf Of Kelly Peterson
Sent: 16 juillet, 1999 12:21
To: radiusnt@iea-software.com
Subject: [RadiusNT] Some of our clients are being assigned 0.0.0.0 IP
address

The problem doesn't seem to be totally random. That is some clients are
prone to getting it while most never get it. Our syslog entries look like
this:

Jul 15 20:27:11 ns19.interbaun.com At 20:29:22, Facility "Auth Facility",
Level "COMMON":: Port slot:2/mod:4 user ight session connected, call id
16974191, protocol: PPP - ip address: 0.0.0.0
Jul 15 20:27:11 ns19.interbaun.com At 20:29:22, Facility "Auth Facility",
Level "COMMON":: Port slot:2/mod:4 user ight session disconnected, call id
16974191, protocol: PPP - ip address 0.0.0.0

This particular user is running Windows 98 and is using a Winmodem LT.

I don't think that the problem is related to radius, but maybe some of you
might have seen this before. We're using Total Control racks with
HiperDSPs running the latest firmware.

Thanks

For more information about this list (including removal) go to:
http://www.iea-software.com/support/maillists/liststart

For more information about this list (including removal) go to:
http://www.iea-software.com/support/maillists/liststart