Erick
-----Original Message-----
From: radiusnt-request@iea-software.com
[mailto:radiusnt-request@iea-software.com]On Behalf Of Ariel Andrés
Rabenbach
Sent: Wednesday, April 14, 1999 10:35 AM
To: radiusnt@iea-software.com
Subject: Re: [RadiusNT] Server Ports and ip address
Thanks but I have de Cisco IOS Version 11.3(6) and it doesn`t work
----- Original Message -----
From: Ronnie D. Franklin <ronnie@itexas.net>
To: <radiusnt@iea-software.com>
Sent: Miércoles, 14 de Abril de 1999 01:59 p.m.
Subject: RE: [RadiusNT] Server Ports and ip address
> But, the Cisco does send the IP in an UPDATE record if your have IOS 11.3
or
> later...
>
> > -----Original Message-----
> > From: radiusnt-request@iea-software.com
> > [mailto:radiusnt-request@iea-software.com]On Behalf Of Ariel Andrés
> > Rabenbach
> > Sent: Wednesday, April 14, 1999 11:43 AM
> > To: radiusnt@iea-software.com
> > Subject: Re: [RadiusNT] Server Ports and ip address
> >
> >
> > Thanks agian Dale !
> > ----- Original Message -----
> > From: Dale E. Reed Jr. <daler@iea-software.com>
> > To: <radiusnt@iea-software.com>
> > Sent: Miércoles, 14 de Abril de 1999 01:32 p.m.
> > Subject: Re: [RadiusNT] Server Ports and ip address
> >
> >
> > > > Ariel Andrés Rabenbach wrote:
> > > >
> > > > Hi!
> > > > When an user connect to my access server the radius reoport it
> > > > correct in Server port table but the ip address of this user only
> > > > apears when the user disocnnects .
> > > > How I can know de IP address of the users before they
> > > > disconnects.
> > >
> > > What type of terminal server are you using? Ciscos do not send
> > > the IP in the Start accounting packet.
> > >
> > >
> > > --
> > >
> > > Dale E. Reed Jr. Emerald and RadiusNT
> > > __________________________________________
> > > IEA Software, Inc. www.iea-software.com
> > >
> >
>
>