This is my detail:
- I used Win 95 and Win98,
- I don't want to bring up terminal after dialed. I want the user that 's
familiar with their daily ISP dial-up do as their ever do, that is just
typing their username and password once and use as usual they work.
-If I don't select "bring up terminal after dialed" , I couldn't pass the
radius authentication by using users file. This means ,I don't yet use the
NT domain authen right now.
- My purpose is to use NT authentication, I downloaded the document and read
it, do follow the document , but still unsuccessful. For NT authentication
setting, if you have any recommendation ,please let me know.
I plan to use RadiusNT with all of my customer, but now it's in testing
process, please help me on this problem.
Thank you
chensak
-----Original Message-----
From: Dale E. Reed Jr. <daler@iea-software.com>
To: radiusnt@iea-software.com <radiusnt@iea-software.com>
Date: 4 มีนาคม 2542 11:59
Subject: Re: [RadiusNT] NT domain authentication problem
>> chensak wrote:
>>
>> I tested RadiusNT 2.5 on NT/Alpha, first I tested by using the user
>> in users file that come with radius ,user "test", Password: "test", it
>> 's o.K., RadiusNT can authenticate this user.
>>
>> 1. My question is : How can I set the username and password only one
>> time in Dial-up networking ? Now I have to select "Bring up terminal
>> windows after dialing" in the property of that dial-up networking,
>> that is ,when I dialed successfully , the terminal screen showed and I
>> have to put username and password again in terminal windows...If I
>> didn't select "Bring up terminal after dialing", it didn't work and I
>> didn't pass the authentication process.
>>
>> 2.. My purpose is to use NT Domain authen, because my customer has a
>> lot of users on NT Domain,
>>
>> When I tried to config the RadiusNT to use NT Domain
>> Authentication, by edit the 2 lines in users file,
>>
>> * In clients file, I put the Access Server 's IP Address and secret
>> key
>> * In users file, I modified the DEFAULT line to DEFAULT Password =
>> "WINNT\DOMAIN" (I put my NT Domain "bdg") and User-Service =
>> Framed-User
>> * I did the same in question 1. , that is the terminal screen
>> happen, after dialed, I put my NT usersname and password ,but
>> unsuccessfully, "Authentication failed".
>
>Most likely the problem is that you are using CHAP for the
>authentication.
>Bringing up a terminal window allows PAP. You can change your security
>settings in DUN to "Allow any, including clear text" and it should work.
>
>--
>
>Dale E. Reed Jr. Emerald and RadiusNT
>__________________________________________
>IEA Software, Inc. www.iea-software.com
>
>For more information about this list, including removal, please
>see this URL: http://www.iea-software.com/maillist.html
For more information about this list, including removal, please
see this URL: http://www.iea-software.com/maillist.html