------=_NextPart_000_003A_01BE6623.B6896A20
Content-Type: text/plain;
charset="windows-874"
Content-Transfer-Encoding: quoted-printable
Hi
I tested RadiusNT 2.5 on NT/Alpha, first I tested by using the user =
in users file that come with radius ,user "test", Password: "test", it =
's o.K., RadiusNT can authenticate this user.
1. My question is : How can I set the username and password only one =
time in Dial-up networking ? Now I have to select "Bring up terminal =
windows after dialing" in the property of that dial-up networking, that =
is ,when I dialed successfully , the terminal screen showed and I have =
to put username and password again in terminal windows...If I didn't =
select "Bring up terminal after dialing", it didn't work and I didn't =
pass the authentication process. =20
=20
2.. My purpose is to use NT Domain authen, because my customer has a lot =
of users on NT Domain,
When I tried to config the RadiusNT to use NT Domain Authentication, =
by edit the 2 lines in users file,
a.. In clients file, I put the Access Server 's IP Address and =
secret key=20
b.. In users file, I modified the DEFAULT line to DEFAULT Password =
=3D "WINNT\DOMAIN" (I put my NT Domain "bdg") and User-Service =3D =
Framed-User=20
c.. I did the same in question 1. , that is the terminal screen =
happen, after dialed, I put my NT usersname and password ,but =
unsuccessfully, "Authentication failed".
rgds
chensak
------=_NextPart_000_003A_01BE6623.B6896A20
Content-Type: text/html;
charset="windows-874"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD W3 HTML//EN">